Moracin D
Based on 1 publication(s) in Google Scholar
Moracin D is a flavonoid that can be isolated from Morus alba. Moracin D induces cell apoptosis and shows hypoglycemic, antiadipogenic, antifungal and antitumor effects. Moracin D can be used for fungal infection and breast cancer research.
For research use only. We do not sell to patients.
- Purity: 98.68%
- CAS No.: 69120-07-6
- Formula: C19H16O4
- Molecular Weight:308.33
-
Storage:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) Moracin D
More
Biological Activity
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| RAW264.7 | IC50 |
18 μM
Compound: 4, Moracin D
|
Antiinflammatory activity against mouse RAW264.7 cells assessed as reduction of IFNgamma-induced NO production
Antiinflammatory activity against mouse RAW264.7 cells assessed as reduction of IFNgamma-induced NO production
|
[PMID: 25461329] |
| RAW264.7 | IC50 |
18 μM
Compound: 4, Moracin D
|
Antiinflammatory activity against mouse RAW264.7 cells assessed as reduction of LPS-induced NO production
Antiinflammatory activity against mouse RAW264.7 cells assessed as reduction of LPS-induced NO production
|
[PMID: 25461329] |
Moracin D (0, 3.75, 7.5, 15 and 30 μM; 24 hours) reduces the viability of DU145 and PC3 cells with IC50s of 15 and 24.8 μM, respectively[1]. Moracin D (0, 7.5 and 15 μM; 24 hours) increases sub G1 population in DU145 and PC3 prostate cancer cells[1]. Moracin D (0, 7.5 and 15 μM; 24 hours) represses the expression level of antiapoptotic proteins, increases TUNEL-positive cells and induces apoptosis in DU145 cells[1]. Moracin D shows antifungal activities to Fusarium roseum, F. lateritium, F. solani, Diaporthe nomurai, Stigmina mori, Rosellinia necatrix and Cochliobolus miyabeanus with MIC values of 7-14, 28-56, 112, 7-14, 56-112, ＜3.5 and 14-28 μg/mL, respectively[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:DU145 and PC3 cell lines
-
Concentration:0, 3.75, 7.5, 15 and 30 μM
-
Incubation Time:24 hours
-
Result:Significantly and dose-dependently reduced the viability of DU145 and PC3 cells.
-
Cell Line:DU145 cell line
-
Concentration:0, 7.5 and 15 μM
-
Incubation Time:24 hours
-
Result:Cleaved PARP, activated PPAR-γ/PKC-δ, and decreased the level of Pro-caspase 3, Bcl-2, Bcl-xL, PKC-α and phosphorylation of NF-κB, ERK, AKT in DU145 cells.
Chemical Information
-
CAS No. 69120-07-6
-
Appearance Solid
-
Molecular Weight 308.33
-
Formula C19H16O4
-
Color White to off-white
-
SMILES
OC1=C2C=CC(C)(C)OC2=CC(C3=CC4=CC=C(O)C=C4O3)=C1
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
J Nat Prod
Discovery and Characterization of Moracin C as an Anti-Gouty Arthritis/Hyperuricemia Candidate by Docking-Based Virtual Screening and Pharmacological Evaluation. [Abstract]2023 Sep 22;86(9):2091-2101. PMID: 37625387
Solvent & Solubility
DMSO : 50 mg/mL (162.16 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.25 mg/mL (4.05 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1.25 mg/mL (4.05 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
[1]. Yoon JS, et al. Moracin D induces apoptosis in prostate cancer cells via activation of PPAR gamma/PKC delta and inhibition of PKC alpha. Phytother Res. 2021 Dec;35(12):6944-6953. [Content Brief]
[3]. Hwang SM, et al. Inhibition of Wnt3a/FOXM1/β-Catenin Axis and Activation of GSK3β and Caspases are Critically Involved in Apoptotic Effect of Moracin D in Breast Cancers. Int J Mol Sci. 2018 Sep 10;19(9):2681. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.2433 mL | 16.2164 mL | 32.4328 mL | 81.0820 mL |
| 5 mM | 0.6487 mL | 3.2433 mL | 6.4866 mL | 16.2164 mL | |
| 10 mM | 0.3243 mL | 1.6216 mL | 3.2433 mL | 8.1082 mL | |
| 15 mM | 0.2162 mL | 1.0811 mL | 2.1622 mL | 5.4055 mL | |
| 20 mM | 0.1622 mL | 0.8108 mL | 1.6216 mL | 4.0541 mL | |
| 25 mM | 0.1297 mL | 0.6487 mL | 1.2973 mL | 3.2433 mL | |
| 30 mM | 0.1081 mL | 0.5405 mL | 1.0811 mL | 2.7027 mL | |
| 40 mM | 0.0811 mL | 0.4054 mL | 0.8108 mL | 2.0270 mL | |
| 50 mM | 0.0649 mL | 0.3243 mL | 0.6487 mL | 1.6216 mL | |
| 60 mM | 0.0541 mL | 0.2703 mL | 0.5405 mL | 1.3514 mL | |
| 80 mM | 0.0405 mL | 0.2027 mL | 0.4054 mL | 1.0135 mL | |
| 100 mM | 0.0324 mL | 0.1622 mL | 0.3243 mL | 0.8108 mL |
Moracin D Related Classifications
HY-122943 Related Classifications
Powered by Bioz