Pfn1-IN-2
Pfn1-IN-2 is an inhibitor of Profilin1 (Pfn1) and has the activity to interfere with the interaction between Pfn1 and actin. Pfn1-IN-2 can significantly reduce the overall level of intracellular filamentous (F) actin. Pfn1-IN-2 also slows down the migration and proliferation of endothelial cells (EC). Pfn1-IN-2 can inhibit the angiogenic ability of endothelial cells both in vivo and in vitro.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity : 99.86%
- CAS No.: 919010-22-3
- 화학식: C18H13N7O2
- 분자량:359.34
-
보관:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- Protocol
- 순도&문서
- References
-
Help & FAQs
All Endogenous Metabolite Isoforms
More
Biological Activity
제품 설명
Chemical Information
-
CAS No. 919010-22-3
-
Appearance Solid
-
분자량 359.34
-
화학식 C18H13N7O2
-
Color White to off-white
-
SMILES
O=C1NN=C(C2=C1NC3=NN=NN3C2C4=CC=CC(O)=C4)C5=CC=CC=C5
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
용액&용해도
In Vitro:
DMSO : 50 mg/mL (139.14 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.25 mg/mL (3.48 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1.25 mg/mL (3.48 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (282 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.7829 mL | 13.9144 mL | 27.8288 mL | 69.5720 mL |
| 5 mM | 0.5566 mL | 2.7829 mL | 5.5658 mL | 13.9144 mL | |
| 10 mM | 0.2783 mL | 1.3914 mL | 2.7829 mL | 6.9572 mL | |
| 15 mM | 0.1855 mL | 0.9276 mL | 1.8553 mL | 4.6381 mL | |
| 20 mM | 0.1391 mL | 0.6957 mL | 1.3914 mL | 3.4786 mL | |
| 25 mM | 0.1113 mL | 0.5566 mL | 1.1132 mL | 2.7829 mL | |
| 30 mM | 0.0928 mL | 0.4638 mL | 0.9276 mL | 2.3191 mL | |
| 40 mM | 0.0696 mL | 0.3479 mL | 0.6957 mL | 1.7393 mL | |
| 50 mM | 0.0557 mL | 0.2783 mL | 0.5566 mL | 1.3914 mL | |
| 60 mM | 0.0464 mL | 0.2319 mL | 0.4638 mL | 1.1595 mL | |
| 80 mM | 0.0348 mL | 0.1739 mL | 0.3479 mL | 0.8696 mL | |
| 100 mM | 0.0278 mL | 0.1391 mL | 0.2783 mL | 0.6957 mL |
Pfn1-IN-2 Related Classifications
HY-116903 Related Classifications
Powered by Bioz