(S,S)-PLX-4545
Based on 1 Customer Validation
(S,S)-PLX-4545 (Compound I) is an orally active and cereblon-based molecular glue degrader of IKZF2 (zinc finger transcription factor Helios). (S,S)-PLX-4545 can be used for the study of IKZF2-mediated diseases or disorders, such as proliferative diseases or disorders and/or cancer.
Para uso exclusivo en investigación. No vendemos a pacientes.
- No. CAS: 2892065-49-3
- Fòrmula: C28H31N3O4
- Peso molecular:473.56
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Protocolo
- Pureza y Documentación
- Referencias
-
Help & FAQs
Actividad biológica
Descripciòn
Chemical Information
-
No. CAS 2892065-49-3
-
Appearance Solid
-
Peso molecular 473.56
-
Fòrmula C28H31N3O4
-
SMILES
O=C1CCC(C(N1)=O)N2CC3=C(C2=O)C=CC(O[C@H]4CCCC[C@@H]4N5CC(C5)C6=CC=CC=C6)=C3
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvente y solubilidad
In Vitro:
DMSO : 50 mg/mL (105.58 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.25 mg/mL (2.64 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1.25 mg/mL (2.64 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (273 KB)
-
SDS (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1117 mL | 10.5583 mL | 21.1166 mL | 52.7916 mL |
| 5 mM | 0.4223 mL | 2.1117 mL | 4.2233 mL | 10.5583 mL | |
| 10 mM | 0.2112 mL | 1.0558 mL | 2.1117 mL | 5.2792 mL | |
| 15 mM | 0.1408 mL | 0.7039 mL | 1.4078 mL | 3.5194 mL | |
| 20 mM | 0.1056 mL | 0.5279 mL | 1.0558 mL | 2.6396 mL | |
| 25 mM | 0.0845 mL | 0.4223 mL | 0.8447 mL | 2.1117 mL | |
| 30 mM | 0.0704 mL | 0.3519 mL | 0.7039 mL | 1.7597 mL | |
| 40 mM | 0.0528 mL | 0.2640 mL | 0.5279 mL | 1.3198 mL | |
| 50 mM | 0.0422 mL | 0.2112 mL | 0.4223 mL | 1.0558 mL | |
| 60 mM | 0.0352 mL | 0.1760 mL | 0.3519 mL | 0.8799 mL | |
| 80 mM | 0.0264 mL | 0.1320 mL | 0.2640 mL | 0.6599 mL | |
| 100 mM | 0.0211 mL | 0.1056 mL | 0.2112 mL | 0.5279 mL |
(S,S)-PLX-4545 Related Classifications
HY-159647A Related Classifications
Powered by Bioz