SLF80821178
Based on 1 publication(s) in Google Scholar
SLF80821178 is a potent and orally active inhibitor of Sphingosine-1-Phosphate Transporter (Spns2). SLF80821178 inhibits S1P release with an IC50 of 51 nM in HeLa cells and a T1/2 of 2.4 h in mouse.
For research use only. We do not sell to patients.
- Purity: 99.70%
- CAS No.: 2764877-61-2
- Formula: C21H35N3O
- Molecular Weight:345.52
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Publications Citing Use of MedChemExpress (MCE) SLF80821178
More
Biological Activity
Chemical Information
-
CAS No. 2764877-61-2
-
Appearance Solid
-
Molecular Weight 345.52
-
Formula C21H35N3O
-
Color White to off-white
-
SMILES
O=C(N1CCNCC1)NC2=CC=C(CCCCCCCCCC)C=C2
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
PLoS Pathog
A Spinster-like Transporter at the Inner Membrane Complex is critical for Toxoplasma gondii cytokinesis, motility and invasion. [Abstract]2026 Jan 28;22(1):e1013886. PMID: 41604433
Solvent & Solubility
DMSO : 100 mg/mL (289.42 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.24 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (266 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.8942 mL | 14.4709 mL | 28.9419 mL | 72.3547 mL |
| 5 mM | 0.5788 mL | 2.8942 mL | 5.7884 mL | 14.4709 mL | |
| 10 mM | 0.2894 mL | 1.4471 mL | 2.8942 mL | 7.2355 mL | |
| 15 mM | 0.1929 mL | 0.9647 mL | 1.9295 mL | 4.8236 mL | |
| 20 mM | 0.1447 mL | 0.7235 mL | 1.4471 mL | 3.6177 mL | |
| 25 mM | 0.1158 mL | 0.5788 mL | 1.1577 mL | 2.8942 mL | |
| 30 mM | 0.0965 mL | 0.4824 mL | 0.9647 mL | 2.4118 mL | |
| 40 mM | 0.0724 mL | 0.3618 mL | 0.7235 mL | 1.8089 mL | |
| 50 mM | 0.0579 mL | 0.2894 mL | 0.5788 mL | 1.4471 mL | |
| 60 mM | 0.0482 mL | 0.2412 mL | 0.4824 mL | 1.2059 mL | |
| 80 mM | 0.0362 mL | 0.1809 mL | 0.3618 mL | 0.9044 mL | |
| 100 mM | 0.0289 mL | 0.1447 mL | 0.2894 mL | 0.7235 mL |