(Z)-Lafutidine
(Z)-Lafutidine ((Z)-FRG-8813) is a potent histamine H2 receptor antagonist. (Z)-Lafutidine shows anti-secretory and gastroprotective activities.
For research use only. We do not sell to patients.
- Purity: 99.89%
- CAS No.: 206449-93-6
- Formula: C22H29N3O4S
- Molecular Weight:431.55
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
All Histamine Receptor Isoforms
More
Biological Activity
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Eight- to nine-week-old male C57BL/6 mice weighing 20-24g[1]
-
Dosage:3-30 mg/kg
-
Administration:P.o; twice for 6 days (5-FU: 50 mg/kg; i.p.;once daily)
-
Result:Reduced the severity of diarrhea during 5-FU treatment,in a mostly dose-dependent manner, and a significant effect was observed at a dose of 30 mg/kg.
Chemical Information
-
CAS No. 206449-93-6
-
Appearance Solid
-
Molecular Weight 431.55
-
Formula C22H29N3O4S
-
Color White to light yellow
-
SMILES
O=C(NC/C=C\COC1=NC=CC(CN2CCCCC2)=C1)CS(CC3=CC=CO3)=O
-
Synonyms
(Z)-FRG-8813
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (231.72 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.79 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (274 KB)
-
SDS (396 KB)
- English - EN (396 KB)
- Français - FR (396 KB)
- Deutsch - DE (396 KB)
- Norwegian - NO (396 KB)
- Español - ES (396 KB)
- Swedish - SV (396 KB)
- Italian - IT (396 KB)
- Korean - KR (396 KB)
- Portuguese - PT (396 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3172 mL | 11.5861 mL | 23.1723 mL | 57.9307 mL |
| 5 mM | 0.4634 mL | 2.3172 mL | 4.6345 mL | 11.5861 mL | |
| 10 mM | 0.2317 mL | 1.1586 mL | 2.3172 mL | 5.7931 mL | |
| 15 mM | 0.1545 mL | 0.7724 mL | 1.5448 mL | 3.8620 mL | |
| 20 mM | 0.1159 mL | 0.5793 mL | 1.1586 mL | 2.8965 mL | |
| 25 mM | 0.0927 mL | 0.4634 mL | 0.9269 mL | 2.3172 mL | |
| 30 mM | 0.0772 mL | 0.3862 mL | 0.7724 mL | 1.9310 mL | |
| 40 mM | 0.0579 mL | 0.2897 mL | 0.5793 mL | 1.4483 mL | |
| 50 mM | 0.0463 mL | 0.2317 mL | 0.4634 mL | 1.1586 mL | |
| 60 mM | 0.0386 mL | 0.1931 mL | 0.3862 mL | 0.9655 mL | |
| 80 mM | 0.0290 mL | 0.1448 mL | 0.2897 mL | 0.7241 mL | |
| 100 mM | 0.0232 mL | 0.1159 mL | 0.2317 mL | 0.5793 mL |