Akt1-IN-1
Based on 1 publication(s) in Google Scholar
Akt1-IN-1 (compound 5b) is a potent and selective Akt1 inhibitor with an IC50 value of 18.79 nM in MIA Paca-2 cells. Akt1-IN-1 does not exhibit obvious teratogenicity, hepatotoxicity and cardiotoxicity (No Observed Adverse Effect Level > 100 µM). Akt1-IN-1 can be used for researching anticancer.
For research use only. We do not sell to patients.
- Purity: 99.77%
- Formula: C31H32FN5O5S2
- Molecular Weight:637.74
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Publications Citing Use of MedChemExpress (MCE) Akt1-IN-1
More
Biological Activity
IC50: 18.79 nM in MIA Paca-2 cells[1]
Chemical Information
-
Appearance Solid
-
Molecular Weight 637.74
-
Formula C31H32FN5O5S2
-
Color Off-white to light brown
-
SMILES
CC1=CC=C(C=C1)S(=O)(N2C(COCC3=C(N=C(N=C3C(C)C)N(S(C)(=O)=O)C)C4=CC=C(F)C=C4)=CC5=CN=CC=C52)=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Biochim Biophys Acta Mol Basis Dis
2025 Dec 13;1872(3):168132. PMID: 41397617
Solvent & Solubility
DMSO : 100 mg/mL (156.80 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.5 mg/mL (3.92 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2.5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (281 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.5680 mL | 7.8402 mL | 15.6804 mL | 39.2009 mL |
| 5 mM | 0.3136 mL | 1.5680 mL | 3.1361 mL | 7.8402 mL | |
| 10 mM | 0.1568 mL | 0.7840 mL | 1.5680 mL | 3.9201 mL | |
| 15 mM | 0.1045 mL | 0.5227 mL | 1.0454 mL | 2.6134 mL | |
| 20 mM | 0.0784 mL | 0.3920 mL | 0.7840 mL | 1.9600 mL | |
| 25 mM | 0.0627 mL | 0.3136 mL | 0.6272 mL | 1.5680 mL | |
| 30 mM | 0.0523 mL | 0.2613 mL | 0.5227 mL | 1.3067 mL | |
| 40 mM | 0.0392 mL | 0.1960 mL | 0.3920 mL | 0.9800 mL | |
| 50 mM | 0.0314 mL | 0.1568 mL | 0.3136 mL | 0.7840 mL | |
| 60 mM | 0.0261 mL | 0.1307 mL | 0.2613 mL | 0.6533 mL | |
| 80 mM | 0.0196 mL | 0.0980 mL | 0.1960 mL | 0.4900 mL | |
| 100 mM | 0.0157 mL | 0.0784 mL | 0.1568 mL | 0.3920 mL |