SYM2206
Based on 1 Customer Validation
SYM2206 is a potent and non-competitive AMPA receptor antagonist, with an IC50 of 1.6 μM. SYM2206 blocks Nav1.6-mediated persistent currents.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.83%
- CAS No.: 173952-44-8
- Formule: C20H22N4O3
- Masse moléculaire:366.41
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Voir tous les produits spécifiques à Isoform iGluR
More
Activité biologique
Description
Chemical Information
-
CAS No. 173952-44-8
-
Appearance Solid
-
Masse moléculaire 366.41
-
Formule C20H22N4O3
-
Color Light yellow to yellow
-
SMILES
O=C(N1N=C(C2=CC=C(N)C=C2)C3=C(C=C4C(OCO4)=C3)C1C)NCCC
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvant et solubilité
In Vitro:
DMSO : 100 mg/mL (272.92 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.75 mg/mL (7.51 mM); Clear solution
This protocol yields a clear solution of ≥ 2.75 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (27.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (272 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Bleakman D, et, al. Kainate receptor agonists, antagonists and allosteric modulators. Curr Pharm Des. 2002;8(10):873-85. [Content Brief]
[2]. Welch NC, et al. Traditional AMPA receptor antagonists partially block Na v1.6-mediated persistent current. Neuropharmacology. 2008 Dec;55(7):1165-71. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.7292 mL | 13.6459 mL | 27.2918 mL | 68.2296 mL |
| 5 mM | 0.5458 mL | 2.7292 mL | 5.4584 mL | 13.6459 mL | |
| 10 mM | 0.2729 mL | 1.3646 mL | 2.7292 mL | 6.8230 mL | |
| 15 mM | 0.1819 mL | 0.9097 mL | 1.8195 mL | 4.5486 mL | |
| 20 mM | 0.1365 mL | 0.6823 mL | 1.3646 mL | 3.4115 mL | |
| 25 mM | 0.1092 mL | 0.5458 mL | 1.0917 mL | 2.7292 mL | |
| 30 mM | 0.0910 mL | 0.4549 mL | 0.9097 mL | 2.2743 mL | |
| 40 mM | 0.0682 mL | 0.3411 mL | 0.6823 mL | 1.7057 mL | |
| 50 mM | 0.0546 mL | 0.2729 mL | 0.5458 mL | 1.3646 mL | |
| 60 mM | 0.0455 mL | 0.2274 mL | 0.4549 mL | 1.1372 mL | |
| 80 mM | 0.0341 mL | 0.1706 mL | 0.3411 mL | 0.8529 mL | |
| 100 mM | 0.0273 mL | 0.1365 mL | 0.2729 mL | 0.6823 mL |
SYM2206 Related Classifications
HY-18689 Related Classifications
Powered by Bioz