MGH-CP1
Based on 2 publication(s) in Google Scholar
MGH-CP1 is a potent and orally active TEAD2 and TEAD4 auto-palmitoylation inhibitor with IC50s of 710 nM and 672 nM, respectively. MGH-CP1 can decrease the palmitoylation levels of endogenous or ectopically expressed TEAD proteins in cells. MGH-CP1 can suppress Myc expression, inhibit epithelial over-proliferation, and induce apoptosis when together with Lats1/2 deletion.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.56%
- CAS No.: 896657-58-2
- Formule: C20H24N4OS
- Masse moléculaire:368.50
-
Stockage:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Apoptosis Compound Library
HY-L003
-
Anti-Cancer Compound Library
HY-L025
-
Orally Active Compound Library
HY-L061
-
Cell Death Library
HY-L162
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Non-Alcoholic Fatty Liver Disease (NAFLD) Compound Library
HY-L199
-
High-Throughput Bioactive Compound Library
HY-L205
Publications Citing Use of MedChemExpress (MCE) MGH-CP1
More
Activité biologique
IC50: 710 nM (TEAD2), 672 nM (TEAD4) [1]
MGH-CP1 (0-100 μM) inhibits auto-palmitoylation of recombinant TEAD2 and TEAD4 in a dose-dependent manner[1].
MGH-CP1 (0-2 μM) inhibits TEAD-binding sites (TBS)-Luc reporter activity in a dose-dependent manner in YAP-expressing HEK293 cells[1].
MGH-CP1 does not affect YAP nuclear localization or protein levels but potently inhibits TEAD-mediated transcription in a dose-dependent manner and effectively blocks cell over-proliferation[1].
MGH-CP1 can suppress Myc expression, inhibit epithelial over-proliferation, and induce apoptosis when together with Lats1/2 deletion[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Mice (induced high-dose Cre recombination by intraperitoneal injection of 120mg/kg Tamoxifen for two consecutive days)[1]
-
Dosage:75 mg/kg
-
Administration:PO; daily, for 2 weeks
-
Result:Effectively inhibited the palmitoylation of TEAD proteins in the intestinal epithelium in wild-type mice, but effectively inhibited upregulation of the TEAD target genes, CTGF and ANKRD1, in Lats1/2 KO mice intestine.
Chemical Information
-
CAS No. 896657-58-2
-
Appearance Solid
-
Masse moléculaire 368.50
-
Formule C20H24N4OS
-
Color White to yellow
-
SMILES
O=C(CSC1=NN=CN1)NC2=CC=C(C=C2)C3(C[C@H](C4)C5)C[C@H]5C[C@H]4C3
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Mol Biomed
Lactate-driven pyrimidine synthesis promotes ferroptosis resistance in hepatocellular carcinoma. [Abstract]2026 Apr 17;7(1):53. PMID: 41996004 -
Elife
VGLL2 and TEAD1 fusion proteins identified in human sarcoma drive YAP/TAZ-independent tumorigenesis by engaging EP300. [Abstract]2025 May 8:13:RP98386. PMID: 40338073
Solvant et solubilité
DMSO : 100 mg/mL (271.37 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.78 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.78 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (274 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.7137 mL | 13.5685 mL | 27.1370 mL | 67.8426 mL |
| 5 mM | 0.5427 mL | 2.7137 mL | 5.4274 mL | 13.5685 mL | |
| 10 mM | 0.2714 mL | 1.3569 mL | 2.7137 mL | 6.7843 mL | |
| 15 mM | 0.1809 mL | 0.9046 mL | 1.8091 mL | 4.5228 mL | |
| 20 mM | 0.1357 mL | 0.6784 mL | 1.3569 mL | 3.3921 mL | |
| 25 mM | 0.1085 mL | 0.5427 mL | 1.0855 mL | 2.7137 mL | |
| 30 mM | 0.0905 mL | 0.4523 mL | 0.9046 mL | 2.2614 mL | |
| 40 mM | 0.0678 mL | 0.3392 mL | 0.6784 mL | 1.6961 mL | |
| 50 mM | 0.0543 mL | 0.2714 mL | 0.5427 mL | 1.3569 mL | |
| 60 mM | 0.0452 mL | 0.2261 mL | 0.4523 mL | 1.1307 mL | |
| 80 mM | 0.0339 mL | 0.1696 mL | 0.3392 mL | 0.8480 mL | |
| 100 mM | 0.0271 mL | 0.1357 mL | 0.2714 mL | 0.6784 mL |
MGH-CP1 Related Classifications
HY-139330 Related Classifications
Powered by Bioz