SW106065
Based on 1 publication(s) in Google Scholar
SW106065 is an apoptosis inducer in malignant peripheral nerve sheath tumors (MPNST). SW106065 inhibits ATP consumption of sMPNST and other models of MPNST with an EC50 of 1 µM. SW106065 can be used for MPNST research.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.96%
- CAS No.: 62289-81-0
- Formule: C10H8N2OS
- Masse moléculaire:204.25
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Publications Citing Use of MedChemExpress (MCE) SW106065
More
Activité biologique
SW106065 (Compound 21, Cpd21) inhibits the human MPNST cell lines growth in a dose-dependent manner, and EC50 concentrations of 439 nM and 753.6 nM for S462 and SNF96.2 cells, respectively. SW106065 remains nontoxic to normally dividing Schwann cells or mouse embryonic fibroblasts[1].
SW106065 (Cpd21; 0.25-5 µM; 24 hours; sMPNST cells) treatment shows a decreased percentage of cells in S phase, and a corresponding increased percentage in G1/G0 and G2/M[1].
SW106065 (Cpd21; 0.25-5 µM; 24 hours; sMPNST cells) treatment decreases the levels of cyclin A2, cyclin B1, cyclin D1, cyclin E, cdk4, and cdk6. And increases levels of cdkn1a and cdkn2a mRNA were observed in a dose-dependent manner.
SW106065 (Cpd21; 0.25-5 µM; 24 hours; sMPNST cells) treatment decreases the levels of Cyclin D1 protein[1].
SW106065 (Cpd21) treatment significant increase in the percentage of apoptotic cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:sMPNST cells
-
Concentration:0.25 µM, 0.5 µM, 1 µM, 2.5 µM, and 5 µM
-
Incubation Time:24 hours
-
Result:Showed a decreased percentage of cells in S phase, and a corresponding increased percentage in G1/G0 and G2/M.
-
Cell Line:sMPNST cells
-
Concentration:0.25 µM, 0.5 µM, 1 µM, 2.5 µM, and 5 µM
-
Incubation Time:24 hours
-
Result:Decreased levels of cyclin A2, cyclin B1, cyclin D1, cyclin E, cdk4, and cdk6. Increased levels of cdkn1a and cdkn2a mRNA were observed in a dose-dependent manner.
-
Cell Line:sMPNST cells
-
Concentration:0.25 µM, 0.5 µM, 1 µM, 2.5 µM, and 5 µM
-
Incubation Time:24 hours
-
Result:Decreased levels of Cyclin D1 protein.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:NCR-nu/nu female mice (6-7 week old) injected with MPNST cells[1]
-
Dosage:40 mg/kg
-
Administration:Intraperitoneal injection; twice per day for 4 weeks
-
Result:Reduced MPNST burden in a mouse allograft model.
Chemical Information
-
CAS No. 62289-81-0
-
Appearance Solid
-
Masse moléculaire 204.25
-
Formule C10H8N2OS
-
Color Off-white to light yellow
-
SMILES
O=C(C1=CC=CS1)NC2=CC=CN=C2
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
bioRxiv
PTEN-loss confers dependence on the guanylate synthesis enzyme IMPDH in T-cell acute lymphoblastic leukemia. [Abstract]2025 Dec 24:2025.12.22.696045. PMID: 41497604
Solvant et solubilité
DMSO : 100 mg/mL (489.60 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (12.24 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (12.24 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (278 KB)
-
SDS (396 KB)
- English - EN (396 KB)
- Français - FR (396 KB)
- Deutsch - DE (396 KB)
- Norwegian - NO (396 KB)
- Español - ES (396 KB)
- Swedish - SV (396 KB)
- Italian - IT (396 KB)
- Korean - KR (396 KB)
- Portuguese - PT (396 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 4.8960 mL | 24.4798 mL | 48.9596 mL | 122.3990 mL |
| 5 mM | 0.9792 mL | 4.8960 mL | 9.7919 mL | 24.4798 mL | |
| 10 mM | 0.4896 mL | 2.4480 mL | 4.8960 mL | 12.2399 mL | |
| 15 mM | 0.3264 mL | 1.6320 mL | 3.2640 mL | 8.1599 mL | |
| 20 mM | 0.2448 mL | 1.2240 mL | 2.4480 mL | 6.1200 mL | |
| 25 mM | 0.1958 mL | 0.9792 mL | 1.9584 mL | 4.8960 mL | |
| 30 mM | 0.1632 mL | 0.8160 mL | 1.6320 mL | 4.0800 mL | |
| 40 mM | 0.1224 mL | 0.6120 mL | 1.2240 mL | 3.0600 mL | |
| 50 mM | 0.0979 mL | 0.4896 mL | 0.9792 mL | 2.4480 mL | |
| 60 mM | 0.0816 mL | 0.4080 mL | 0.8160 mL | 2.0400 mL | |
| 80 mM | 0.0612 mL | 0.3060 mL | 0.6120 mL | 1.5300 mL | |
| 100 mM | 0.0490 mL | 0.2448 mL | 0.4896 mL | 1.2240 mL |