Nitroflurbiprofen
Based on 1 Customer Validation
Nitroflurbiprofen is a cyclooxygenase (COX) inhibitor with nitric oxide (NO)-donating properties, modulates the increased intrahepatic vascular tone in portal hypertensive cirrhotic rats.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.58%
- CAS. Nr.: 158836-71-6
- Formel: C19H20FNO5
- Molecular Weight:361.36
-
Speicherung:Pure form -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Protokoll
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
-
Anti-Cardiovascular Disease Compound Library
HY-L046
-
Human Metabolite Library
HY-L123
-
Radioprotector Library
HY-L178
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Anti-Rheumatic Arthritis Compound Library
HY-L210
-
Mass Spectrometry Human Metabolite Library
HY-L215
-
Immunology/Inflammation Compound Library
HY-L007
-
Anti-Aging Compound Library
HY-L034
Biologische Aktivität
|
COX |
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 158836-71-6
-
Appearance Oil
-
Molecular Weight 361.36
-
Formel C19H20FNO5
-
Color Colorless to light yellow
-
SMILES
O=C(OCCCCO[N+]([O-])=O)C(C)C1=CC=C(C2=CC=CC=C2)C(F)=C1
-
Synonyms
HCT 1206; NO-flurbiprofen; Nitroxybutyl flurbiprofen
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Pure form -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 200 mg/mL (553.46 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (13.84 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protokoll
Rats[1]
Male Wistar rats, weighing 200-250 g, are used. After 18 weeks of TAA administration, cirrhotic rats are equally (n=8/group) and randomly allocated to one of the following groups: intraperitoneal injection, 24 hours and 1 hour prior to the measurements, with Nitroflurbiprofen (45 mg/kg), Flurbiprofen (30 mg/kg, equimolar concentration to Nitroflurbiprofen), or vehicle (250 μL DMSO:250 μL isotonic saline). The used dose is based on a dose-finding study (n=5 per condition). The concentrations of Nitroflurbiprofen (15 mg/kg) and Flurbiprofen (7.5 mg/kg, equimolar concentration to Nitroflurbiprofen Flurbiprofen) are started, then are increased the dose to Nitroflurbiprofen 22.5 mg/kg and Flurbiprofen 15 mg/kg, and, finally, Nitroflurbiprofen 45 mg/kg and Flurbiprofen 30 mg/kg. The last dose regimen has the most profound hemodynamic effects.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Reinheit & Dokumentation
-
Data Sheet (270 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.7673 mL | 13.8366 mL | 27.6732 mL | 69.1831 mL |
| 5 mM | 0.5535 mL | 2.7673 mL | 5.5346 mL | 13.8366 mL | |
| 10 mM | 0.2767 mL | 1.3837 mL | 2.7673 mL | 6.9183 mL | |
| 15 mM | 0.1845 mL | 0.9224 mL | 1.8449 mL | 4.6122 mL | |
| 20 mM | 0.1384 mL | 0.6918 mL | 1.3837 mL | 3.4592 mL | |
| 25 mM | 0.1107 mL | 0.5535 mL | 1.1069 mL | 2.7673 mL | |
| 30 mM | 0.0922 mL | 0.4612 mL | 0.9224 mL | 2.3061 mL | |
| 40 mM | 0.0692 mL | 0.3459 mL | 0.6918 mL | 1.7296 mL | |
| 50 mM | 0.0553 mL | 0.2767 mL | 0.5535 mL | 1.3837 mL | |
| 60 mM | 0.0461 mL | 0.2306 mL | 0.4612 mL | 1.1531 mL | |
| 80 mM | 0.0346 mL | 0.1730 mL | 0.3459 mL | 0.8648 mL | |
| 100 mM | 0.0277 mL | 0.1384 mL | 0.2767 mL | 0.6918 mL |
Nitroflurbiprofen Related Classifications
HY-U00013 Related Classifications
Powered by Bioz