NIBR-LTSi
Based on 2 publication(s) in Google Scholar
NIBR-LTSi is an orally active and selective LATS kinase inhibitor. NIBR-LTSi can activate YAP signaling. NIBR-LTSi promotes stem cell proliferation, maintains stemness and blocks differentiation. NIBR-LTSi accelerates liver regeneration following extended hepatectomy in mice.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.97%
- Formel: C18H20N4O
- Molecular Weight:308.38
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) NIBR-LTSi
More
Customer Validation & Images
-
WB
-
Cell Imaging/Staining
Alle YAP Isoform-spezifische Produkte anzeigen
More
Biologische Aktivität
LATS[1]
NIBR-LTSi (0.1-10 μM; 2 h) inhibits YAP phosphorylation in JHH5 cells with an IC50 of 2.16 μM[1].
NIBR-LTSi (1-10 μM; 3-10 days) promotes keratinocyte proliferation, increases epidermal thickness and blocks keratinocyte differentiation in human 3D skin model[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Partial hepatectomy treated C57BL/6 WT mice[1]
-
Dosage:30 and 100 mg/kg
-
Administration:Oral administration (p.o.); single dose
-
Result:Significantly induced hepatocyte proliferation in a dose-dependent manner.
Chemical Information
-
Appearance Solid
-
Molecular Weight 308.38
-
Formel C18H20N4O
-
Color White to off-white
-
SMILES
C1(NC2=CC=C(C=C2)O[C@H]3CNCCC3)=CC=NC4=C1C=CN4
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Cell
2026 Jun 11;189(12):3541-3552.e18. PMID: 41999746 -
Biochim Biophys Acta Mol Cell Res
Senolytic elimination of senescent cells improved periodontal ligament stem cell-based bone regeneration partially through inhibiting YAP. [Abstract]2025 Feb 17;1872(3):119921. PMID: 39971252
NIBR-LTSi purchased from MedChemExpress. Usage Cited in: Biochim Biophys Acta Mol Cell Res. 2025 Feb 17;1872(3):119921. [Abstract]
NIBR-LTSi (2.5 μM). Western blot results of YAP and the senescence-related genes P21 and apoptosis-related genes BCL2 and BAX in PDLSCs.
NIBR-LTSi purchased from MedChemExpress. Usage Cited in: Biochim Biophys Acta Mol Cell Res. 2025 Feb 17;1872(3):119921. [Abstract]
NIBR-LTSi (2.5 μM). Microscopic observation and quantitative analysis of β-galactosidase-positive stained PDLSCs were performed. NC: P20 PDLSCs. +S: P20 PDLSCs were treated with senolytics. +S+N: P20 PDLSCs treated with senolytics plus NIBR-LTSi.
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (324.28 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (16.21 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (16.21 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (274 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.2428 mL | 16.2138 mL | 32.4275 mL | 81.0688 mL |
| 5 mM | 0.6486 mL | 3.2428 mL | 6.4855 mL | 16.2138 mL | |
| 10 mM | 0.3243 mL | 1.6214 mL | 3.2428 mL | 8.1069 mL | |
| 15 mM | 0.2162 mL | 1.0809 mL | 2.1618 mL | 5.4046 mL | |
| 20 mM | 0.1621 mL | 0.8107 mL | 1.6214 mL | 4.0534 mL | |
| 25 mM | 0.1297 mL | 0.6486 mL | 1.2971 mL | 3.2428 mL | |
| 30 mM | 0.1081 mL | 0.5405 mL | 1.0809 mL | 2.7023 mL | |
| 40 mM | 0.0811 mL | 0.4053 mL | 0.8107 mL | 2.0267 mL | |
| 50 mM | 0.0649 mL | 0.3243 mL | 0.6486 mL | 1.6214 mL | |
| 60 mM | 0.0540 mL | 0.2702 mL | 0.5405 mL | 1.3511 mL | |
| 80 mM | 0.0405 mL | 0.2027 mL | 0.4053 mL | 1.0134 mL | |
| 100 mM | 0.0324 mL | 0.1621 mL | 0.3243 mL | 0.8107 mL |
NIBR-LTSi Related Classifications
HY-160769 Related Classifications
Powered by Bioz