SAICAR
Based on 4 publication(s) in Google Scholar
SAICAR is an intermediate of de novo purine nucleotide biosynthesis, activates pyruvate kinase isoform M2 (PKM2) in an isozyme-selective manner, with an EC50 of 0.3 mM. SAICAR stimulates PKM2 and promotes cancer cell survival in glucose-limited conditions.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.57%
- CAS. Nr.: 3031-95-6
- Formel: C13H19N4O12P
- Molecular Weight:454.28
-
Speicherung:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) SAICAR
MoreAlle Endogenous Metabolite Isoform-spezifische Produkte anzeigen
More
Biologische Aktivität
|
Human Endogenous Metabolite |
SAICAR accumulation induces nuclear localization of PKM2. PKM2-SAICAR phosphorylates and activates Erk1/2, which in turn sensitizes PKM2 for SAICAR binding through phosphorylation. Additionally, PKM2-SAICAR was necessary to induce sustained Erk1/2 activation and mitogen-induced cell proliferation. SAICAR-PKM2 interaction is necessary and sufficient to induce H3 T11 and Erk1/2 phosphorylation[2].
Upon glucose starvation, cellular SAICAR concentration increases in an oscillatory manner and stimulates PKM2 activity in cancer cells. The SAICAR-PKM2 interaction also promotes cancer cell survival in glucose-limited conditions. In glucose-limited conditions, cells with higher SAICAR concentrations (adsl-kd cells or cells overexpressing PAICS) survive better while paics-kd cells died earlier than control-kd cells. SAICAR promotes cancer cell survival in glucose-limited conditions[3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 3031-95-6
-
Appearance Solid
-
Molecular Weight 454.28
-
Formel C13H19N4O12P
-
Color White to pale purple
-
SMILES
O=C(O)C[C@@H](C(O)=O)NC(C1=C(N)N([C@H]2[C@@H]([C@@H]([C@@H](COP(O)(O)=O)O2)O)O)C=N1)=O
-
Structure Classification
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Publications (4)
-
Journal Impact Factor
-
Most Recent
-
Cancer Res
SAICAR Drives T Regulatory Cell Differentiation and FOXP3 Maintenance to Promote Immunotherapy Resistance. [Abstract]2026 May 4;86(9):2218-2236. PMID: 41671386 -
Nat Commun
INSIG1/2 succination mediated by the moonlighting function of ADSL promotes lipogenesis and liver tumorigenesis. [Abstract]2026 Mar 15;17(1):4002. PMID: 41833955 -
Drug Test Anal
2022 Nov;14(11-12):2017-2025. PMID: 36342242 -
Methods Protoc
2025 Oct 29;8(6):126. PMID: 41283386
Lösungsmittel & Löslichkeit
DMSO : 220 mg/mL (484.28 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 100 mg/mL (220.13 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5.5 mg/mL (12.11 mM); Clear solution
This protocol yields a clear solution of ≥ 5.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (55.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5.5 mg/mL (12.11 mM); Clear solution
This protocol yields a clear solution of ≥ 5.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (55.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Reinheit & Dokumentation
-
Data Sheet (275 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
Verweise
[1]. Keller KE, et al. SAICAR stimulates pyruvate kinase isoform M2 and promotes cancer cell survival in glucose-limited conditions. Science. 2012 Nov 23;338(6110):1069-72. [Content Brief]
[2]. Keller KE, et al. SAICAR induces protein kinase activity of PKM2 that is necessary for sustained proliferative signaling of cancer cells. Mol Cell. 2014 Mar 6;53(5):700-9. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 2.2013 mL | 11.0064 mL | 22.0129 mL | 55.0321 mL |
| 5 mM | 0.4403 mL | 2.2013 mL | 4.4026 mL | 11.0064 mL | |
| 10 mM | 0.2201 mL | 1.1006 mL | 2.2013 mL | 5.5032 mL | |
| 15 mM | 0.1468 mL | 0.7338 mL | 1.4675 mL | 3.6688 mL | |
| 20 mM | 0.1101 mL | 0.5503 mL | 1.1006 mL | 2.7516 mL | |
| 25 mM | 0.0881 mL | 0.4403 mL | 0.8805 mL | 2.2013 mL | |
| 30 mM | 0.0734 mL | 0.3669 mL | 0.7338 mL | 1.8344 mL | |
| 40 mM | 0.0550 mL | 0.2752 mL | 0.5503 mL | 1.3758 mL | |
| 50 mM | 0.0440 mL | 0.2201 mL | 0.4403 mL | 1.1006 mL | |
| 60 mM | 0.0367 mL | 0.1834 mL | 0.3669 mL | 0.9172 mL | |
| 80 mM | 0.0275 mL | 0.1376 mL | 0.2752 mL | 0.6879 mL | |
| 100 mM | 0.0220 mL | 0.1101 mL | 0.2201 mL | 0.5503 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
SAICAR Related Classifications
HY-126585 Related Classifications
Powered by Bioz