SLB1122168 formic
Based on 1 publication(s) in Google Scholar
SLB1122168 formic is a Spinster Homolog 2 (Spns2) inhibitor. SLB1122168 formic inhibits Spns2-mediated sphingosine-1-phosphate (S1P) release with an IC50 of 94 nM. SLB1122168 formic induces lymphopenia in circulating lymphocytes in mice and rats.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.91%
- Formel: C23H37N3O3
- Molecular Weight:403.56
-
Speicherung:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
-
GPCR/G Protein Compound Library
HY-L006
-
Immunology/Inflammation Compound Library
HY-L007
-
Anti-Pulmonary Fibrosis Compound Library
HY-L125
-
Membrane Protein-targeted Compound Library
HY-L149
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Lactylation Compound Library
HY-L249
Publications Citing Use of MedChemExpress (MCE) SLB1122168 formic
More
Biologische Aktivität
|
S1P |
SLB1122168 (Compound 33p) (0.3 μM; 18-20 h) formic potently inhibits Spns2-mediated S1P release in mouse Spns2-transfected HeLa cells with an IC50 of 94 nM[1].
SLB1122168 (10 μM) formic shows no inhibitory activity against Mfsd2b-mediated S1P release from mouse red blood cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
SLB1122168 (10 mg/kg; i.p.; single dose) formic induces a 55% decrease in circulating lymphocytes in male Sprague-Dawley rats[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:C57BL/6J (female)[1]
-
Dosage:10 mg/kg; 30 mg/kg
-
Administration:i.p.; single dose
-
Result:Induced a significant decrease in circulating lymphocytes relative to vehicle control at 4 h post-dose.
Caused no significant change in plasma S1P levels at 4 h post-dose.
Induced a dose-dependent decrease in circulating lymphocytes relative to vehicle control at 16 h post-dose.
Chemical Information
-
Appearance Solid
-
Molecular Weight 403.56
-
Formel C23H37N3O3
-
Color Off-white to light yellow
-
SMILES
CCCCCCCCCCC1=CC=C2C(OC(NC[C@@H]3CNCC3)=N2)=C1.OC=O
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
PLoS Pathog
A Spinster-like Transporter at the Inner Membrane Complex is critical for Toxoplasma gondii cytokinesis, motility and invasion. [Abstract]2026 Jan 28;22(1):e1013886. PMID: 41604433
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (247.79 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.19 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.19 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (270 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4779 mL | 12.3897 mL | 24.7795 mL | 61.9487 mL |
| 5 mM | 0.4956 mL | 2.4779 mL | 4.9559 mL | 12.3897 mL | |
| 10 mM | 0.2478 mL | 1.2390 mL | 2.4779 mL | 6.1949 mL | |
| 15 mM | 0.1652 mL | 0.8260 mL | 1.6520 mL | 4.1299 mL | |
| 20 mM | 0.1239 mL | 0.6195 mL | 1.2390 mL | 3.0974 mL | |
| 25 mM | 0.0991 mL | 0.4956 mL | 0.9912 mL | 2.4779 mL | |
| 30 mM | 0.0826 mL | 0.4130 mL | 0.8260 mL | 2.0650 mL | |
| 40 mM | 0.0619 mL | 0.3097 mL | 0.6195 mL | 1.5487 mL | |
| 50 mM | 0.0496 mL | 0.2478 mL | 0.4956 mL | 1.2390 mL | |
| 60 mM | 0.0413 mL | 0.2065 mL | 0.4130 mL | 1.0325 mL | |
| 80 mM | 0.0310 mL | 0.1549 mL | 0.3097 mL | 0.7744 mL | |
| 100 mM | 0.0248 mL | 0.1239 mL | 0.2478 mL | 0.6195 mL |
SLB1122168 formic Related Classifications
HY-150254A Related Classifications
Powered by Bioz