MV1
Based on 1 Customer Validation
MV1 is an antagonist of IAP (inhibitor of apoptosis protein), leads to protein knockdown of HaloTag-fused proteins when combined with HaloTag ligand.
For research use only. We do not sell to patients.
- Purity: 98.65%
- CAS No.: 1001600-54-9
- Formula: C33H44N4O5
- Molecular Weight:576.73
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Apoptosis Compound Library
HY-L003
-
Anti-Cancer Compound Library
HY-L025
-
Anti-Prostate Cancer Compound Library
HY-L124
-
Heterocyclic Compound Library
HY-L138
-
Cell Death Library
HY-L162
-
Anti-Ovarian Cancer Compound Library
HY-L173
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Non-Alcoholic Fatty Liver Disease (NAFLD) Compound Library
HY-L199
-
High-Throughput Bioactive Compound Library
HY-L205
Biological Activity
MV1 (0.08-20 μM; 24 h) inhibits the growth of EVSAT cells[1].
MV1 (5 μM; 0-60 min) treatment causes rapid loss of c-IAP1 and c-IAP2 in MDA-MB-231 cells[1].
MV1 (5 μM; 1 h) treatment inducing degradation of c-IAP1 and c-IAP2 is dependent on proteasomal machinery but not on caspase activation[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:EVSAT cells
-
Concentration:0.08-20 μM
-
Incubation Time:24 hours
-
Result:Showed IC50 value of 5 μM for EVSAT cells.
-
Cell Line:MDA-MB-231 cells
-
Concentration:5 μM
-
Incubation Time:0-60 min
-
Result:Showed the decreasement of c-IAP1 and 2 protein levels by as early as two minutes following exposure.
Chemical Information
-
CAS No. 1001600-54-9
-
Appearance Solid
-
Molecular Weight 576.73
-
Formula C33H44N4O5
-
Color White to off-white
-
SMILES
O=C(OC)[C@H](C(C1=CC=CC=C1)C2=CC=CC=C2)NC([C@H]3N(C([C@H](C4CCCCC4)NC([C@H](C)NC)=O)=O)CCC3)=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvent & Solubility
DMSO : ≥ 125 mg/mL (216.74 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (3.61 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (3.61 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (277 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
[1]. Tomoshige S, et al. Efficient protein knockdown of HaloTag-fused proteins using hybrid molecules consisting of IAP antagonist and HaloTag ligand. Bioorg Med Chem. 2016 Jul 15;24(14):3144-8. [Content Brief]
[2]. Eugene Varfolomeev, et al. IAP antagonists induce autoubiquitination of c-IAPs, NF-kappaB activation, and TNFalpha-dependent apoptosis. Cell. 2007 Nov 16;131(4):669-81. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.7339 mL | 8.6696 mL | 17.3391 mL | 43.3478 mL |
| 5 mM | 0.3468 mL | 1.7339 mL | 3.4678 mL | 8.6696 mL | |
| 10 mM | 0.1734 mL | 0.8670 mL | 1.7339 mL | 4.3348 mL | |
| 15 mM | 0.1156 mL | 0.5780 mL | 1.1559 mL | 2.8899 mL | |
| 20 mM | 0.0867 mL | 0.4335 mL | 0.8670 mL | 2.1674 mL | |
| 25 mM | 0.0694 mL | 0.3468 mL | 0.6936 mL | 1.7339 mL | |
| 30 mM | 0.0578 mL | 0.2890 mL | 0.5780 mL | 1.4449 mL | |
| 40 mM | 0.0433 mL | 0.2167 mL | 0.4335 mL | 1.0837 mL | |
| 50 mM | 0.0347 mL | 0.1734 mL | 0.3468 mL | 0.8670 mL | |
| 60 mM | 0.0289 mL | 0.1445 mL | 0.2890 mL | 0.7225 mL | |
| 80 mM | 0.0217 mL | 0.1084 mL | 0.2167 mL | 0.5418 mL | |
| 100 mM | 0.0173 mL | 0.0867 mL | 0.1734 mL | 0.4335 mL |
MV1 Related Classifications
HY-113534 Related Classifications
Powered by Bioz