CYM-5541
Based on 4 publication(s) in Google Scholar
CYM-5541 (ML249) is an selective and allosteric S1P3 receptor agonist with an EC50 between 72 and 132 nM.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.98%
- CAS No.: 945128-26-7
- Formule: C19H28N2O2
- Masse moléculaire:316.44
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Protocole
- Pureté et documentation
- Références
-
Help & FAQs
-
GPCR/G Protein Compound Library
HY-L006
-
Immunology/Inflammation Compound Library
HY-L007
-
Anti-Cardiovascular Disease Compound Library
HY-L046
-
Targeted Diversity Library
HY-L099
-
Membrane Protein-targeted Compound Library
HY-L149
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Highly Selective Activators Library
HY-L159
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Lactylation Compound Library
HY-L249
Publications Citing Use of MedChemExpress (MCE) CYM-5541
More
Activité biologique
EC50: between 72 and 132 nM (S1P3)[1]
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| CHO | EC50 |
105 nM
Compound: 5f, CYM5541
|
Agonist activity at human S1P3 receptor expressed in CHO cells after 4 hrs by fluorescence assay
Agonist activity at human S1P3 receptor expressed in CHO cells after 4 hrs by fluorescence assay
|
[PMID: 24135724] |
CYM-5541 is a full agonist, able to reach the maximum level of ERK phosphorylation that is observed with S1P. CYM-5541 has an EC50 of between 72 and 132 nM and exhibits exquisite selectivity over other S1P receptor subtypes: S1P1 EC50>10 μM, S1P2 EC50>50 μM, S1P4 EC50>50 μM, and S1P5 EC50>25 μM. CYM-5541 also shows selectivity over a large panel of protein targets, with no significant activities, in the Ricerca profiling panel of 55 GPCRs, ion channels, and transporters. CYM-5541 allowed us to identify an allosteric site where F263 is a key gate-keeper residue for its affinity and efficacy. The novel allosteric hydrophobic pocket may account for the S1P3 selectivity of CYM-5541[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 945128-26-7
-
Appearance Solid
-
Masse moléculaire 316.44
-
Formule C19H28N2O2
-
Color White to off-white
-
SMILES
O=C(C1=NOC(C2CC2)=C1)N(C3CCCCC3)C4CCCCC4
-
Synonyms
ML249
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (4)
-
Journal Impact Factor
-
Most Recent
-
Biomed Pharmacother
S1PR3 agonism and S1P lyase inhibition rescue mice in the severe state of experimental sepsis. [Abstract]2024 May:174:116575. PMID: 38599060 -
Int Immunopharmacol
CD83 mediates the inhibitory effect of the S1PR1 agonist CYM5442 on LPS-induced M1 polarization of macrophages through the ERK-STAT-1 signaling pathway. [Abstract]2024 Oct 31;143(Pt 3):113526. PMID: 39486189 -
iScience
Broad and diverse roles of sphingosine-1-phosphate/sphingosine-1-phosphate receptors in the prostate. [Abstract]2024 Oct 30;27(12):111290. PMID: 39618500 -
Solvant et solubilité
DMSO : 17.5 mg/mL (55.30 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.90 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (7.90 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocole
Jump-In TI CHO-K cells stably expressing WT or mutant S1P3 are serum-starved for 4 hrs. They are then incubated at 4 °C for 30 min in the binding buffer containing 20 mM Tris-HCl (pH 7.5), 100 mM NaCl, 15 mM NaF, 0.5 mM EDTA, 1 mM Na3VO4, 0.5% fatty acid-free bovine serum albumin, and protease inhibitor mixture with 0.1 nM [33P]S1P and increasing concentrations of S1P, SPM-242, or CYM-5541. Cells are washed three times with cold binding buffer. Cell-bound radioactivity is measured by lysing the cells with 0.5% SDS followed by liquid scintillation counting. The raw data is normalized so that the level of [33P]S1P bound to each cell line (WT or mutant) in the absence of competing ligand is referenced as 100% for its own cell line[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Pureté et documentation
-
Fiche technique (276 KB)
-
SDS (392 KB)
- English - EN (392 KB)
- Français - FR (392 KB)
- Deutsch - DE (392 KB)
- Norwegian - NO (392 KB)
- Español - ES (392 KB)
- Swedish - SV (392 KB)
- Italian - IT (392 KB)
- Korean - KR (392 KB)
- Portuguese - PT (392 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.1602 mL | 15.8008 mL | 31.6016 mL | 79.0039 mL |
| 5 mM | 0.6320 mL | 3.1602 mL | 6.3203 mL | 15.8008 mL | |
| 10 mM | 0.3160 mL | 1.5801 mL | 3.1602 mL | 7.9004 mL | |
| 15 mM | 0.2107 mL | 1.0534 mL | 2.1068 mL | 5.2669 mL | |
| 20 mM | 0.1580 mL | 0.7900 mL | 1.5801 mL | 3.9502 mL | |
| 25 mM | 0.1264 mL | 0.6320 mL | 1.2641 mL | 3.1602 mL | |
| 30 mM | 0.1053 mL | 0.5267 mL | 1.0534 mL | 2.6335 mL | |
| 40 mM | 0.0790 mL | 0.3950 mL | 0.7900 mL | 1.9751 mL | |
| 50 mM | 0.0632 mL | 0.3160 mL | 0.6320 mL | 1.5801 mL |
CYM-5541 Related Classifications
HY-101419 Related Classifications
Powered by Bioz