DK2403
Based on 1 Customer Validation
DK2403 (compound 25) is a MAP2K7 inhibitor (IC50= 0.01 μM). DK2403 can effectively inhibit MAP2K7 without significantly disrupting the larger kinase group and can be used to study childhood T-cell acute lymphoblastic leukemia.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.24%
- CAS No.: 2902651-64-1
- Formule: C19H17ClN4O2
- Masse moléculaire:368.82
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Activité biologique
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| Jurkat | IC50 |
1.4 μM
Compound: 25
|
Cytotoxicity against human Jurkat cells assessed as cell growth inhibition measured after 18 hrs by Celltiter-Glo luminescence assay
Cytotoxicity against human Jurkat cells assessed as cell growth inhibition measured after 18 hrs by Celltiter-Glo luminescence assay
|
[PMID: 37197477] |
| Jurkat | IC50 |
1.6 μM
Compound: 25
|
Cytotoxicity against human Jurkat cells assessed as cell growth inhibition measured after 18 hrs followed by compound washout by Celltiter-Glo luminescence assay
Cytotoxicity against human Jurkat cells assessed as cell growth inhibition measured after 18 hrs followed by compound washout by Celltiter-Glo luminescence assay
|
[PMID: 37197477] |
| Jurkat | IC50 |
2 μM
Compound: 25
|
Cytotoxicity against human Jurkat cells assessed as cell growth inhibition measured after 48 hrs by Celltiter-Glo luminescence assay
Cytotoxicity against human Jurkat cells assessed as cell growth inhibition measured after 48 hrs by Celltiter-Glo luminescence assay
|
[PMID: 37197477] |
| KOPTK1 | IC50 |
1.9 μM
Compound: 25
|
Cytotoxicity against human KOPT-K1 cells assessed as cell growth inhibition measured after 18 hrs followed by compound washout by Celltiter-Glo luminescence assay
Cytotoxicity against human KOPT-K1 cells assessed as cell growth inhibition measured after 18 hrs followed by compound washout by Celltiter-Glo luminescence assay
|
[PMID: 37197477] |
| KOPTK1 | IC50 |
2.2 μM
Compound: 25
|
Cytotoxicity against human KOPT-K1 cells assessed as cell growth inhibition measured after 18 hrs by Celltiter-Glo luminescence assay
Cytotoxicity against human KOPT-K1 cells assessed as cell growth inhibition measured after 18 hrs by Celltiter-Glo luminescence assay
|
[PMID: 37197477] |
| KOPTK1 | IC50 |
2.8 μM
Compound: 25
|
Cytotoxicity against human KOPT-K1 cells assessed as cell growth inhibition measured after 48 hrs by Celltiter-Glo luminescence assay
Cytotoxicity against human KOPT-K1 cells assessed as cell growth inhibition measured after 48 hrs by Celltiter-Glo luminescence assay
|
[PMID: 37197477] |
| RPMI 8402 | IC50 |
2.9 μM
Compound: 25
|
Cytotoxicity against human RPMI 8402 cells assessed as cell growth inhibition measured after 48 hrs by Celltiter-Glo luminescence assay
Cytotoxicity against human RPMI 8402 cells assessed as cell growth inhibition measured after 48 hrs by Celltiter-Glo luminescence assay
|
[PMID: 37197477] |
Chemical Information
-
CAS No. 2902651-64-1
-
Appearance Solid
-
Masse moléculaire 368.82
-
Formule C19H17ClN4O2
-
Color White to off-white
-
SMILES
O=C(CCl)NC1=CC(OC2=NC=NC(NCC3=CC=CC=C3)=C2)=CC=C1
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
DMSO : 125 mg/mL (338.92 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 6.25 mg/mL (16.95 mM); Clear solution
This protocol yields a clear solution of ≥ 6.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (62.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (268 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.7113 mL | 13.5567 mL | 27.1135 mL | 67.7837 mL |
| 5 mM | 0.5423 mL | 2.7113 mL | 5.4227 mL | 13.5567 mL | |
| 10 mM | 0.2711 mL | 1.3557 mL | 2.7113 mL | 6.7784 mL | |
| 15 mM | 0.1808 mL | 0.9038 mL | 1.8076 mL | 4.5189 mL | |
| 20 mM | 0.1356 mL | 0.6778 mL | 1.3557 mL | 3.3892 mL | |
| 25 mM | 0.1085 mL | 0.5423 mL | 1.0845 mL | 2.7113 mL | |
| 30 mM | 0.0904 mL | 0.4519 mL | 0.9038 mL | 2.2595 mL | |
| 40 mM | 0.0678 mL | 0.3389 mL | 0.6778 mL | 1.6946 mL | |
| 50 mM | 0.0542 mL | 0.2711 mL | 0.5423 mL | 1.3557 mL | |
| 60 mM | 0.0452 mL | 0.2259 mL | 0.4519 mL | 1.1297 mL | |
| 80 mM | 0.0339 mL | 0.1695 mL | 0.3389 mL | 0.8473 mL | |
| 100 mM | 0.0271 mL | 0.1356 mL | 0.2711 mL | 0.6778 mL |