EN4
Based on 2 publication(s) in Google Scholar
EN4 is a covalent ligand that targets cysteine 171 (C171) of MYC. EN4 is selective for c-MYC over N-MYC and L-MYC. EN4 inhibits MYC transcriptional activity, downregulates MYC targets, and impairs tumorigenesis.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 96.29%
- CAS No.: 1197824-15-9
- Formule: C25H24N2O4
- Masse moléculaire:416.47
-
Stockage:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Apoptosis Compound Library
HY-L003
-
Anti-Cancer Compound Library
HY-L025
-
Covalent Screening Library
HY-L036
-
Glutamine Metabolism Compound Library
HY-L064
-
Anti-Breast Cancer Compound Library
HY-L074
-
Anti-Cancer Metabolism Compound Library
HY-L083
-
Transcription Factor-Targeted Library
HY-L090
-
Anti-Prostate Cancer Compound Library
HY-L124
-
Cancer Stem Cells Compound Library
HY-L135
-
Mitochondrial Protection Compound Library
HY-L144
-
Cysteine Targeted Covalent Library
HY-L153
-
Highly Selective Inhibitors Library
HY-L158
-
Anti-Ovarian Cancer Compound Library
HY-L173
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Covalent Screening Library Plus
HY-L036P
-
Bioactive Compound Library
HY-L001
-
Cell Proliferation Compound Library
HY-L201
-
Lactic Acid Metabolic Compound Library
HY-L204
-
High-Throughput Bioactive Compound Library
HY-L205
Publications Citing Use of MedChemExpress (MCE) EN4
More
Activité biologique
EN4 (1-50 μM; for 72 hours) treatment significantly impaires 231MFP breast cancer cell proliferation in a dosedependent manner, with >90% inhibition of proliferation at 50 μM[1].
EN4 (50 μM; for 60 hours) treatment significantly decreases the protein levels of representative MYC-regulated target genes, including CDK2 and CDC25A. EN4 treatment also substantially reduces MYC levels[1].
EN4 shows the strongest inhibition of both MYC/MAX binding to its DNA consensus sequence in vitro as well as MYC transcriptional activity in cells. EN4 inhibited MYC/MAX binding to the E-box response element DNA consensus sequence in a dose-responsive manner with an IC50 value of 6.7 μM. EN4 also inhibits MYC luciferase reporter activity in a dose-responsive manner with an IC50 value of 2.8 μM[1].
EN4 (50 μM; for 2 hours) treatment significantly reduced MYC thermal stability in 231MFP breast cancer cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:231MFP breast cancer cells
-
Concentration:1 μM, 10 μM, 50 μM
-
Incubation Time:72 hours
-
Result:Significantly impaired 231MFP breast cancer cell proliferation in a dose-dependent manner.
-
Cell Line:231MFP breast cancer cells
-
Concentration:50 μM
-
Incubation Time:60 hours
-
Result:The protein levels of CDK2 and CDC25A were significantly lowered.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:SCID mice injected with 231MFP breast cancer cells[1]
-
Dosage:50 mg/kg
-
Administration:Intraperitoneal injection; daily; for 3 weeks
-
Result:Significantly attenuated tumor growth in vivo.
Chemical Information
-
CAS No. 1197824-15-9
-
Appearance Solid
-
Masse moléculaire 416.47
-
Formule C25H24N2O4
-
Color White to light yellow
-
SMILES
O=C(NC1=CC=CC=C1OC2=CC=C(OCC)C=C2)C3=CC=C(CNC(C=C)=O)C=C3
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Sci Signal
The kinase PLK1 promotes Hedgehog signaling-dependent resistance to the antiandrogen enzalutamide in metastatic prostate cancer. [Abstract]2025 Mar 18;18(878):eadi5174. PMID: 40100956 -
Solvant et solubilité
DMSO : 125 mg/mL (300.14 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.08 mg/mL (4.99 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.08 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.08 mg/mL (4.99 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.08 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (276 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4011 mL | 12.0057 mL | 24.0113 mL | 60.0283 mL |
| 5 mM | 0.4802 mL | 2.4011 mL | 4.8023 mL | 12.0057 mL | |
| 10 mM | 0.2401 mL | 1.2006 mL | 2.4011 mL | 6.0028 mL | |
| 15 mM | 0.1601 mL | 0.8004 mL | 1.6008 mL | 4.0019 mL | |
| 20 mM | 0.1201 mL | 0.6003 mL | 1.2006 mL | 3.0014 mL | |
| 25 mM | 0.0960 mL | 0.4802 mL | 0.9605 mL | 2.4011 mL | |
| 30 mM | 0.0800 mL | 0.4002 mL | 0.8004 mL | 2.0009 mL | |
| 40 mM | 0.0600 mL | 0.3001 mL | 0.6003 mL | 1.5007 mL | |
| 50 mM | 0.0480 mL | 0.2401 mL | 0.4802 mL | 1.2006 mL | |
| 60 mM | 0.0400 mL | 0.2001 mL | 0.4002 mL | 1.0005 mL | |
| 80 mM | 0.0300 mL | 0.1501 mL | 0.3001 mL | 0.7504 mL | |
| 100 mM | 0.0240 mL | 0.1201 mL | 0.2401 mL | 0.6003 mL |
EN4 Related Classifications
HY-134761 Related Classifications
Powered by Bioz