Cyfluthrin
Based on 1 Customer Validation
Cyfluthrin is a type II pyrethroid and has effects on various insects. Cyfluthrin is a modulator of Nav1.8 sodium channels by repetitive stimulation. Cyfluthrin can be applied in agriculture,veterinary, insecticide,pyrethroid and stored product.
For research use only. We do not sell to patients.
- Purity: 99.52%
- CAS No.: 68359-37-5
- Formula: C22H18Cl2FNO3
- Molecular Weight:434.29
-
Storage:Pure form -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
|
Nav1.8 |
Cyfluthrin (0-50 μM; 24 hours) is against SH-SY5Y cell growth with an IC50 and an IC30 of 19.39 μM and 4.81 μM, respectively[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 68359-37-5
-
Appearance Oil
-
Molecular Weight 434.29
-
Formula C22H18Cl2FNO3
-
Color Light yellow to yellow
-
SMILES
O=C(C1C(C)(C)C1/C=C(Cl)\Cl)OC(C#N)C2=CC=C(F)C(OC3=CC=CC=C3)=C2
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Pure form -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : ≥ 200 mg/mL (460.52 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 5 mg/mL (11.51 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 5 mg/mL (11.51 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (277 KB)
-
SDS (729 KB)
- English - EN (729 KB)
- Français - FR (729 KB)
- Deutsch - DE (729 KB)
- Norwegian - NO (729 KB)
- Español - ES (729 KB)
- Swedish - SV (729 KB)
- Italian - IT (729 KB)
- Korean - KR (729 KB)
- Portuguese - PT (729 KB)
-
Handling Instructions (2659 KB)
References
[1]. Jin-Sung Choi,et al.Structure-activity Relationships for the Action of 11 Pyrethroid Insecticides on Rat Na v 1.8 Sodium Channels Expressed in Xenopus Oocytes.Toxicol Appl Pharmacol. 2006 Mar 15;211(3):233-44 [Content Brief]
[2]. María-Aránzazu Martínez, et al. Oxidative Stress and Related Gene Expression Effects of Cyfluthrin in Human Neuroblastoma SH-SY5Y Cells: Protective Effect of Melatonin. Environ Res. 2019 Oct;177:108579. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3026 mL | 11.5130 mL | 23.0261 mL | 57.5652 mL |
| 5 mM | 0.4605 mL | 2.3026 mL | 4.6052 mL | 11.5130 mL | |
| 10 mM | 0.2303 mL | 1.1513 mL | 2.3026 mL | 5.7565 mL | |
| 15 mM | 0.1535 mL | 0.7675 mL | 1.5351 mL | 3.8377 mL | |
| 20 mM | 0.1151 mL | 0.5757 mL | 1.1513 mL | 2.8783 mL | |
| 25 mM | 0.0921 mL | 0.4605 mL | 0.9210 mL | 2.3026 mL | |
| 30 mM | 0.0768 mL | 0.3838 mL | 0.7675 mL | 1.9188 mL | |
| 40 mM | 0.0576 mL | 0.2878 mL | 0.5757 mL | 1.4391 mL | |
| 50 mM | 0.0461 mL | 0.2303 mL | 0.4605 mL | 1.1513 mL | |
| 60 mM | 0.0384 mL | 0.1919 mL | 0.3838 mL | 0.9594 mL | |
| 80 mM | 0.0288 mL | 0.1439 mL | 0.2878 mL | 0.7196 mL | |
| 100 mM | 0.0230 mL | 0.1151 mL | 0.2303 mL | 0.5757 mL |