SC57666
Based on 1 Customer Validation
SC57666 is a selective COX2 inhibitor with an IC50 of 26 nM.
For research use only. We do not sell to patients.
- Purity: 98.94%
- CAS No.: 158959-32-1
- Formula: C18H17FO2S
- Molecular Weight:316.39
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
|
COX-2 26 nM (IC50) |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| Sf9 | IC50 |
>50 μM
Compound: 27
|
Inhibitory activity against human recombinant Prostaglandin G/H synthase 1 expressed in microsomes taken from baculovirus infected Sf9 cells
Inhibitory activity against human recombinant Prostaglandin G/H synthase 1 expressed in microsomes taken from baculovirus infected Sf9 cells
|
10.1016/0960-894X(95)00564-A |
| Sf9 | IC50 |
0.026 μM
Compound: 7
|
Inhibition of recombinant human COX-2 expressed in Baculovirus infected sf9 cells using arachidonic acid as substrate preincubated for 10 mins followed by substrate addition measured after 10 mins by ELISA
Inhibition of recombinant human COX-2 expressed in Baculovirus infected sf9 cells using arachidonic acid as substrate preincubated for 10 mins followed by substrate addition measured after 10 mins by ELISA
|
[PMID: 30396033] |
| Sf9 | IC50 |
0.16 μM
Compound: 27
|
Inhibitory activity against human recombinant Prostaglandin G/H synthase 2 expressed in microsomes taken from baculovirus infected Sf9 cells
Inhibitory activity against human recombinant Prostaglandin G/H synthase 2 expressed in microsomes taken from baculovirus infected Sf9 cells
|
10.1016/0960-894X(95)00564-A |
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 158959-32-1
-
Appearance Solid
-
Molecular Weight 316.39
-
Formula C18H17FO2S
-
Color White to off-white
-
SMILES
O=S(C1=CC=C(C2=C(C3=CC=C(F)C=C3)CCC2)C=C1)(C)=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : ≥ 100 mg/mL (316.07 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.90 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (278 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
[1]. Reitz DB, et al. Selective cyclooxygenase inhibitors: novel 1,2-diarylcyclopentenes are potent and orally activeCOX2 inhibitors. J Med Chem. 1994 Nov 11;37(23):3878-81. [Content Brief]
[2]. Riendeau D, et al. Biochemical and pharmacological profile of a tetrasubstituted furanone as a highly selective COX2 inhibitor. Br J Pharmacol. 1997 May;121(1):105-17. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.1607 mL | 15.8033 mL | 31.6066 mL | 79.0164 mL |
| 5 mM | 0.6321 mL | 3.1607 mL | 6.3213 mL | 15.8033 mL | |
| 10 mM | 0.3161 mL | 1.5803 mL | 3.1607 mL | 7.9016 mL | |
| 15 mM | 0.2107 mL | 1.0536 mL | 2.1071 mL | 5.2678 mL | |
| 20 mM | 0.1580 mL | 0.7902 mL | 1.5803 mL | 3.9508 mL | |
| 25 mM | 0.1264 mL | 0.6321 mL | 1.2643 mL | 3.1607 mL | |
| 30 mM | 0.1054 mL | 0.5268 mL | 1.0536 mL | 2.6339 mL | |
| 40 mM | 0.0790 mL | 0.3951 mL | 0.7902 mL | 1.9754 mL | |
| 50 mM | 0.0632 mL | 0.3161 mL | 0.6321 mL | 1.5803 mL | |
| 60 mM | 0.0527 mL | 0.2634 mL | 0.5268 mL | 1.3169 mL | |
| 80 mM | 0.0395 mL | 0.1975 mL | 0.3951 mL | 0.9877 mL | |
| 100 mM | 0.0316 mL | 0.1580 mL | 0.3161 mL | 0.7902 mL |