AZA1
Based on 1 publication(s) in Google Scholar
AZA1 is a potent dual inhibitor of Rac1 and Cdc42. AZA1 induces prostate cancer cells apoptosis and inhibits prostate cancer cells proliferation, migration and invasion.
For research use only. We do not sell to patients.
- Purity: 98.17%
- CAS No.: 1071098-42-4
- Formula: C22H20N6
- Molecular Weight:368.43
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Publications Citing Use of MedChemExpress (MCE) AZA1
More
Biological Activity
AZA1 (Rac1/Cdc42-IN-1) (2-10 μM; 72 hours) blocks the proliferation of human prostate cancer cells 22Rv1 prostate cancer cells[1].
AZA1 (2-10 μM; 24 hours) reduces phosphorylation of PAK1, AKT and BAD in EGF-stimulated 22Rv1 prostate cancer cells[1].
AZA1 (10 μM; 24 hours) blocks Rac1 and Cdc42-dependent cell cycle events in 22Rv1 prostate cancer cells[1].
AZA1 blocks Rac1 and Cdc42-dependent migration of 22Rv1, DU 145 and PC-3 prostate cancer cells[1].
AZA1 affects cell motility and actin rearrangement in prostate cancer cells by suppressing Rac1 and Cdc42 activity via PAK1/2 phosphorylation[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:22Rv1 prostate cancer cells
-
Concentration:2, 5, 10 μM
-
Incubation Time:72 hours
-
Result:Suppressed 22Rv1 prostate cancer cell proliferation in both unstimulated and EGF-stimulated cancer cells in a dose-dependent manner.
-
Cell Line:22Rv1 prostate cancer cells (EGF-stimulated)
-
Concentration:2, 5, 10 μM
-
Incubation Time:24 hours
-
Result:Reduced phosphorylation of PAK1, AKT and BAD in EGF-stimulated 22Rv1 prostate cancer cells.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:5 week-old athymic nu/nu (nude) mice (bearing 22Rv1 prostate cancer cell xenografts)[1]
-
Dosage:100 μg in 100 µl 30% DMSO
-
Administration:I.p.; daily for 2 weeks
-
Result:The suppressive effect of AZA1 on tumor growth was significant.
Chemical Information
-
CAS No. 1071098-42-4
-
Appearance Solid
-
Molecular Weight 368.43
-
Formula C22H20N6
-
Color Light brown to brown
-
SMILES
CC(N1)=CC2=C1C=CC(NC3=NC(NC4=CC5=C(NC(C)=C5)C=C4)=NC=C3)=C2
-
Synonyms
Rac1/Cdc42-IN-1
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (1)
-
Journal Impact Factor
-
Most Recent
Solvent & Solubility
DMSO : 50 mg/mL (135.71 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.79 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.79 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (275 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
[1]. Zins K, et al. A Rac1/Cdc42 GTPase-specific small molecule inhibitor suppresses growth of primary human prostate cancer xenografts and prolongs survival in mice. PLoS One. 2013;8(9):e74924. Published 2013 Sep 11. [Content Brief]
[2]. Suzuki O, et al. Sialylation and glycosylation modulate cell adhesion and invasion to extracellular matrix in human malignant lymphoma: Dependency on integrin and the Rho GTPase family. Int J Oncol. 2015;47(6):2091‐2099. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.7142 mL | 13.5711 mL | 27.1422 mL | 67.8555 mL |
| 5 mM | 0.5428 mL | 2.7142 mL | 5.4284 mL | 13.5711 mL | |
| 10 mM | 0.2714 mL | 1.3571 mL | 2.7142 mL | 6.7855 mL | |
| 15 mM | 0.1809 mL | 0.9047 mL | 1.8095 mL | 4.5237 mL | |
| 20 mM | 0.1357 mL | 0.6786 mL | 1.3571 mL | 3.3928 mL | |
| 25 mM | 0.1086 mL | 0.5428 mL | 1.0857 mL | 2.7142 mL | |
| 30 mM | 0.0905 mL | 0.4524 mL | 0.9047 mL | 2.2618 mL | |
| 40 mM | 0.0679 mL | 0.3393 mL | 0.6786 mL | 1.6964 mL | |
| 50 mM | 0.0543 mL | 0.2714 mL | 0.5428 mL | 1.3571 mL | |
| 60 mM | 0.0452 mL | 0.2262 mL | 0.4524 mL | 1.1309 mL | |
| 80 mM | 0.0339 mL | 0.1696 mL | 0.3393 mL | 0.8482 mL | |
| 100 mM | 0.0271 mL | 0.1357 mL | 0.2714 mL | 0.6786 mL |