PHT-7.3
Based on 1 publication(s) in Google Scholar
PHT-7.3 is a selective inhibitor of connector enhancer of kinase suppressor of Ras 1 (Cnk1) pleckstrin homology (PH) domain (Kd=4.7 μM). PHT-7.3 inhibits mut-KRas, but not wild-type KRas cancer cell and tumor growth and signaling. PHT-7.3 has antitumor activity.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza : 99.29%
- No. CAS: 1614225-93-2
- Fòrmula: C24H23N3O3S
- Peso molecular:433.52
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Protocolo
- Pureza y Documentación
- Referencias
-
Help & FAQs
-
HY-130149
AdagrasibKRAS G12C Inhibitor -
HY-12874
CASINGTPase Cdc42 Inhibitor -
HY-13991
CCG-1423Rho/MRTF/SRF Pathway Inhibitor -
HY-19800
ML-098Ras Activator -
HY-12875
BQU57Ral Inhibitior -
HY-114436
MRTX-1257KRAS G12C Inhibitor -
HY-15717
Kobe2602Ras-Raf Interaction Inhibitor -
HY-18604
K-Ras G12C-IN-1KRAS G12C Inhibitor -
HY-125873
KRAS G12C inhibitor 15KRAS G12C Inhibitor -
HY-18606
K-Ras G12C-IN-3K-ras G12C Inhibitor -
HY-114277
SotorasibKRAS G12C Inhibitor -
HY-14754
SalirasibRas Inhibitor
Publications Citing Use of MedChemExpress (MCE) PHT-7.3
More
Actividad biológica
Descripciòn
IC50 & Target
Cnk1 PH-domain[1]
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Female NOD-SCID mice (mut-KRas A549 NSCLC xenografts, mut-KRas H441 NSCLC xenografts)[1]
-
Dosage:200 mg/kg
-
Administration:Intraperitoneal injection, daily, for 20 days
-
Result:Exhibited cytostatic antitumor activity in the mut-KRas(G12S) A549 xenograft and mut-KRasG12V H441 xenograft .
Chemical Information
-
No. CAS 1614225-93-2
-
Appearance Solid
-
Peso molecular 433.52
-
Fòrmula C24H23N3O3S
-
Color Light yellow to yellow
-
SMILES
O=C1C2=C(C=CC=C2)C(CC3OCCCO3)=NN1CC4=NC(C5=CC=C(C)C=C5)=CS4
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Life Sci Alliance
CNKSR1 serves as a scaffold to activate an EGFR phosphatase via exclusive interaction with RhoB-GTP. [Abstract]2021 Jun 29;4(9):e202101095. PMID: 34187934
Solvente y solubilidad
In Vitro:
DMSO : 62.5 mg/mL (144.17 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 6.25 mg/mL (14.42 mM); Clear solution
This protocol yields a clear solution of ≥ 6.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (62.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocolo
-
Patient-Derived Xenograft (PDX)
Patient-derived xenograft (PDX) models are generated by engrafting primary human tumor tissue directly into immunodeficient mice, allowing in vivo propagation of patient tumor biology without initial in vitro adaptation. These models are used to preserve key histopathological and molecular characteristics of the original tumor and enable assessment of tumor growth dynamics and therapeutic response in a living organism. The biological readout is tumor engraftment and subsequent growth in the murine host, which reflects the ability of human tumor cells to survive, vascularize, and expand in an immunocompromised microenvironment.
-
Patient-Derived Orthotopic Xenograft (PDOX)
Patient-derived orthotopic xenograft (PDOX) modeling implants fresh patient tumor tissue or patient-derived tumor cells into the anatomically corresponding organ or tissue site of immunodeficient mice, usually by surgical orthotopic implantation, to preserve patient tumor histology, local microenvironmental context, invasion, metastatic behavior, and treatment-response features better than subcutaneous implantation. PDOX readouts include tumor engraftment, orthotopic tumor growth, local invasion, metastasis, recurrence after resection, histologic similarity to the donor tumor, biomarker retention, molecular concordance, survival, and response or resistance to therapy. PDOX models are used for preclinical drug testing and individualized therapy evaluation, but engraftment success varies by tumor type and specimen quality.
-
Subcutaneous Cell-Line-Derived Xenograft
Subcutaneous cell-line-derived xenograft (CDX) models are established by implanting cultured human cancer cell lines into immunodeficient mice, where the injected cells form localized tumors that can be monitored in vivo as a measure of tumorigenic potential, growth kinetics, and treatment response. These models are widely used in oncology research because they allow reproducible tumor formation and enable comparative assessment of tumor growth between different cell lines or genetic manipulations in a controlled in vivo microenvironment. Subcutaneous implantation of cancer cells in immunodeficient mice is a standard approach for evaluating tumor growth behavior and therapeutic response across multiple cancer types, including prostate, esophageal, pancreatic, and colon cancer models.
-
Orthotopic Cell-Line Xenograft
Orthotopic cell-line xenograft models involve implantation of human cancer cell lines into the anatomically corresponding organ of immunodeficient mice to reproduce tumor growth within a native microenvironment, enabling more clinically relevant tumor behavior compared with subcutaneous models. These models are widely used because orthotopic placement better recapitulates tumor progression, including invasion and metastatic spread, which are often underrepresented in heterotopic implantation systems. Compared with conventional xenografts, orthotopic implantation is described as more technically complex but provides improved simulation of tumor-microenvironment interactions and metastatic behavior, making it particularly valuable for translational oncology research. Surgical orthotopic implantation approaches have been emphasized as enabling faithful reproduction of clinical cancer features, including metastasis and disease progression patterns that align with the tumor’s organ of origi
Pureza y Documentación
-
Ficha de datos (274 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3067 mL | 11.5335 mL | 23.0670 mL | 57.6675 mL |
| 5 mM | 0.4613 mL | 2.3067 mL | 4.6134 mL | 11.5335 mL | |
| 10 mM | 0.2307 mL | 1.1533 mL | 2.3067 mL | 5.7667 mL | |
| 15 mM | 0.1538 mL | 0.7689 mL | 1.5378 mL | 3.8445 mL | |
| 20 mM | 0.1153 mL | 0.5767 mL | 1.1533 mL | 2.8834 mL | |
| 25 mM | 0.0923 mL | 0.4613 mL | 0.9227 mL | 2.3067 mL | |
| 30 mM | 0.0769 mL | 0.3844 mL | 0.7689 mL | 1.9222 mL | |
| 40 mM | 0.0577 mL | 0.2883 mL | 0.5767 mL | 1.4417 mL | |
| 50 mM | 0.0461 mL | 0.2307 mL | 0.4613 mL | 1.1533 mL | |
| 60 mM | 0.0384 mL | 0.1922 mL | 0.3844 mL | 0.9611 mL | |
| 80 mM | 0.0288 mL | 0.1442 mL | 0.2883 mL | 0.7208 mL | |
| 100 mM | 0.0231 mL | 0.1153 mL | 0.2307 mL | 0.5767 mL |
PHT-7.3 Related Classifications
HY-128590 Related Classifications
Powered by Bioz