Mupirocin lithium
Based on 1 publication(s) in Google Scholar
Mupirocin lithium is an antibiotic. Mupirocin lithium inhibits bacterial isoleucyl-tRNA synthetase, blocking protein synthesis. Mupirocin lithium has high activity against Gram-positive bacteria such as Staphylococcus and Streptococcus, as well as some Gram-negative bacteria (such as Haemophilus influenzae). Mupirocin lithium can be used in the research of diseases such as skin infections (such as MRSA infections) and chronic sinusitis.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 97.0%
- No. CAS: 73346-79-9
- Fòrmula: C26H43LiO9
- Peso molecular:506.56
-
Almacenamiento:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
-
Anti-Infection Compound Library
HY-L002
-
Metabolism/Protease Compound Library
HY-L012
-
Covalent Screening Library
HY-L036
-
Endocrinology Compound Library
HY-L047
-
Antibacterial Compound Library
HY-L049
-
Antibiotics Library
HY-L067
-
Metabolic Enzyme Compound Library
HY-L146
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Covalent Screening Library Plus
HY-L036P
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
Publications Citing Use of MedChemExpress (MCE) Mupirocin lithium
MoreVer todos los productos específicos de isoformas Antibiotic
More
Actividad biológica
Mupirocin lithium inhibits staphylococci and streptococci (except group D streptococci), with a MIC of ≤0.5 μg/mL[1].
Mupirocin (0.1-0.2 mM; 18 h) lithium significantly increases wound closure and proliferation of human keratinocytes (HaCat) and enhances production of growth factors like HGF and PDGF-AA[4].
Mupirocin (≤125 μg/mL) lithium reduces biofilm mass by greater than 90% in all S. aureus isolates[5].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Female BALB/c mice (10-12 weeks old) with superficial skin wound infection induced by MRSA USA300[3]
-
Dosage:2%
-
Administration:Topical application to the lesion area, twice daily, for 3 days or 6 days
-
Result:Reduced bacterial loads in the skin lesions by 2.0 log CFU after 3 days of treatment.
Reduced bacterial loads in the skin lesions by 5.1 log CFU after 6 days of treatment.
Chemical Information
-
No. CAS 73346-79-9
-
Appearance Solid
-
Peso molecular 506.56
-
Fòrmula C26H43LiO9
-
Color White to off-white
-
SMILES
O[C@@H]1[C@@](CO[C@@H](C/C(C)=C/C(OCCCCCCCCC(O[Li])=O)=O)[C@@H]1O)([H])C[C@H]2[C@@]([C@@H](C)[C@@H](O)C)([H])O2
-
Synonyms
BRL-4910A lithium; Pseudomonic acid lithium
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Microbiol Spectr
Antimicrobial efficacy of Bifidobacterium longum FB1-4 cell-free supernatant against MRSA: insights into mechanisms and food matrix application. [Abstract]2026 Apr 7;14(4):e0099125. PMID: 41769981
Solvente y solubilidad
H2O : 100 mg/mL (197.41 mM; Need ultrasonic)
DMSO : 50 mg/mL (98.70 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.94 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (4.94 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Pureza y Documentación
-
Ficha de datos (271 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
[1]. Sutherland R, et al. Antibacterial activity of mupirocin (pseudomonic acid), a new antibiotic for topical use. Antimicrob Agents Chemother. 1985 Apr;27(4):495-8. [Content Brief]
[2]. Parenti MA, et al. Mupirocin: a topical antibiotic with a unique structure and mechanism of action. Clin Pharm. 1987 Oct;6(10):761-70. [Content Brief]
[3]. Vingsbo Lundberg C, et al. Efficacy of topical and systemic antibiotic treatment of meticillin-resistant Staphylococcus aureus in a murine superficial skin wound infection model. Int J Antimicrob Agents. 2013 Sep. 42(3):272-5. [Content Brief]
[4]. Twilley D, et al. Mupirocin Promotes Wound Healing by Stimulating Growth Factor Production and Proliferation of Human Keratinocytes. Front Pharmacol. 2022 Apr 11;13:862112. [Content Brief]
[5]. Ha KR, et al. In vitro activity of mupirocin on clinical isolates of Staphylococcus aureus and its potential implications in chronic rhinosinusitis. Laryngoscope. 2008 Mar;118(3):535-40. [Content Brief]
[6]. Gilbart J, et al. High-level mupirocin resistance in Staphylococcus aureus: evidence for two distinct isoleucyl-tRNA synthetases. Antimicrob Agents Chemother. 1993 Jan;37(1):32-8. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO / H2O | 1 mM | 1.9741 mL | 9.8705 mL | 19.7410 mL | 49.3525 mL |
| 5 mM | 0.3948 mL | 1.9741 mL | 3.9482 mL | 9.8705 mL | |
| 10 mM | 0.1974 mL | 0.9870 mL | 1.9741 mL | 4.9352 mL | |
| 15 mM | 0.1316 mL | 0.6580 mL | 1.3161 mL | 3.2902 mL | |
| 20 mM | 0.0987 mL | 0.4935 mL | 0.9870 mL | 2.4676 mL | |
| 25 mM | 0.0790 mL | 0.3948 mL | 0.7896 mL | 1.9741 mL | |
| 30 mM | 0.0658 mL | 0.3290 mL | 0.6580 mL | 1.6451 mL | |
| 40 mM | 0.0494 mL | 0.2468 mL | 0.4935 mL | 1.2338 mL | |
| 50 mM | 0.0395 mL | 0.1974 mL | 0.3948 mL | 0.9870 mL | |
| 60 mM | 0.0329 mL | 0.1645 mL | 0.3290 mL | 0.8225 mL | |
| 80 mM | 0.0247 mL | 0.1234 mL | 0.2468 mL | 0.6169 mL | |
| H2O | 100 mM | 0.0197 mL | 0.0987 mL | 0.1974 mL | 0.4935 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Mupirocin lithium Related Classifications
HY-W108875 Related Classifications
Powered by Bioz