hCAIX-IN-18
Based on 1 Customer Validation
hCAIX-IN-18 (compound 30) is an inhibitor of carbonic anhydrase (CA), with Kis of 3.5 nM, 9.4 nM, 43.0 nM and 8.2 nM for hCAI, hCAII, hCAIX, hCAXII, respectively. hCAIX-IN-18 can be used for cancer research.
For research use only. We do not sell to patients.
- Purity: 98.52%
- CAS No.: 2925261-76-1
- Formula: C17H19ClN4O3S
- Molecular Weight:394.88
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
|
hCA I 3.5 nM (IC50) |
hCA II 9.4 nM (IC50) |
hCA IX 43 nM (IC50) |
hCA XII 8.2 nM (IC50) |
Chemical Information
-
CAS No. 2925261-76-1
-
Appearance Solid
-
Molecular Weight 394.88
-
Formula C17H19ClN4O3S
-
Color White to off-white
-
SMILES
ClC1=CC=C(/C(N2CCN(C3=CC=C(S(=O)(N)=O)C=C3)CC2)=N\O)C=C1
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 50 mg/mL (126.62 mM; ultrasonic and warming and heat to 80°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 5 mg/mL (12.66 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (271 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.5324 mL | 12.6621 mL | 25.3241 mL | 63.3104 mL |
| 5 mM | 0.5065 mL | 2.5324 mL | 5.0648 mL | 12.6621 mL | |
| 10 mM | 0.2532 mL | 1.2662 mL | 2.5324 mL | 6.3310 mL | |
| 15 mM | 0.1688 mL | 0.8441 mL | 1.6883 mL | 4.2207 mL | |
| 20 mM | 0.1266 mL | 0.6331 mL | 1.2662 mL | 3.1655 mL | |
| 25 mM | 0.1013 mL | 0.5065 mL | 1.0130 mL | 2.5324 mL | |
| 30 mM | 0.0844 mL | 0.4221 mL | 0.8441 mL | 2.1103 mL | |
| 40 mM | 0.0633 mL | 0.3166 mL | 0.6331 mL | 1.5828 mL | |
| 50 mM | 0.0506 mL | 0.2532 mL | 0.5065 mL | 1.2662 mL | |
| 60 mM | 0.0422 mL | 0.2110 mL | 0.4221 mL | 1.0552 mL | |
| 80 mM | 0.0317 mL | 0.1583 mL | 0.3166 mL | 0.7914 mL | |
| 100 mM | 0.0253 mL | 0.1266 mL | 0.2532 mL | 0.6331 mL |