HPK1-IN-19
Based on 1 Customer Validation
HPK1-IN-19 (Compound I-47) is a hematopoietic progenitor kinase 1 (HPK1) inhibitor.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 98.04%
- CAS. Nr.: 2227609-33-6
- Formel: C27H32N7O2P
- Molecular Weight:517.56
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Alle MAP4K Isoform-spezifische Produkte anzeigen
More
Biologische Aktivität
hematopoietic progenitor kinase 1 (HPK1)[1]
Chemical Information
-
CAS. Nr. 2227609-33-6
-
Appearance Solid
-
Molecular Weight 517.56
-
Formel C27H32N7O2P
-
Color Light yellow to yellow
-
SMILES
O=P(C)(C)C1=C(NC2=C(C3=CN(C)N=C3)C=NC(NC4=C(OC)C=C(CCN(C5)C)C5=C4)=N2)C=CC=C1
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (193.21 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.5 mg/mL (4.83 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2.5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (4.83 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2.5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (272 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.9321 mL | 9.6607 mL | 19.3214 mL | 48.3036 mL |
| 5 mM | 0.3864 mL | 1.9321 mL | 3.8643 mL | 9.6607 mL | |
| 10 mM | 0.1932 mL | 0.9661 mL | 1.9321 mL | 4.8304 mL | |
| 15 mM | 0.1288 mL | 0.6440 mL | 1.2881 mL | 3.2202 mL | |
| 20 mM | 0.0966 mL | 0.4830 mL | 0.9661 mL | 2.4152 mL | |
| 25 mM | 0.0773 mL | 0.3864 mL | 0.7729 mL | 1.9321 mL | |
| 30 mM | 0.0644 mL | 0.3220 mL | 0.6440 mL | 1.6101 mL | |
| 40 mM | 0.0483 mL | 0.2415 mL | 0.4830 mL | 1.2076 mL | |
| 50 mM | 0.0386 mL | 0.1932 mL | 0.3864 mL | 0.9661 mL | |
| 60 mM | 0.0322 mL | 0.1610 mL | 0.3220 mL | 0.8051 mL | |
| 80 mM | 0.0242 mL | 0.1208 mL | 0.2415 mL | 0.6038 mL | |
| 100 mM | 0.0193 mL | 0.0966 mL | 0.1932 mL | 0.4830 mL |