JNJ-40255293
Based on 1 Customer Validation
JNJ-40255293 is a high-affinity human A 2A receptor antagonist with a KiKi of 7.5 nM. JNJ-40255293 can be used in the research of neurodegenerative diseases such as Parkinson's disease.
For research use only. We do not sell to patients.
- Purity: 98.45%
- CAS No.: 1147271-25-7
- Formula: C23H22N4O3
- Molecular Weight:402.45
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
All Adenosine Receptor Isoforms
More
Biological Activity
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1147271-25-7
-
Appearance Solid
-
Molecular Weight 402.45
-
Formula C23H22N4O3
-
Color Light yellow to yellow
-
SMILES
O=C1C2=C(C=C(C=C2)OCCN3CCOCC3)C4=NC(N)=NC(C5=CC=CC=C5)=C41
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (248.48 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (12.42 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (273 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4848 mL | 12.4239 mL | 24.8478 mL | 62.1195 mL |
| 5 mM | 0.4970 mL | 2.4848 mL | 4.9696 mL | 12.4239 mL | |
| 10 mM | 0.2485 mL | 1.2424 mL | 2.4848 mL | 6.2120 mL | |
| 15 mM | 0.1657 mL | 0.8283 mL | 1.6565 mL | 4.1413 mL | |
| 20 mM | 0.1242 mL | 0.6212 mL | 1.2424 mL | 3.1060 mL | |
| 25 mM | 0.0994 mL | 0.4970 mL | 0.9939 mL | 2.4848 mL | |
| 30 mM | 0.0828 mL | 0.4141 mL | 0.8283 mL | 2.0707 mL | |
| 40 mM | 0.0621 mL | 0.3106 mL | 0.6212 mL | 1.5530 mL | |
| 50 mM | 0.0497 mL | 0.2485 mL | 0.4970 mL | 1.2424 mL | |
| 60 mM | 0.0414 mL | 0.2071 mL | 0.4141 mL | 1.0353 mL | |
| 80 mM | 0.0311 mL | 0.1553 mL | 0.3106 mL | 0.7765 mL | |
| 100 mM | 0.0248 mL | 0.1242 mL | 0.2485 mL | 0.6212 mL |