UK122 TFA
Based on 3 publication(s) in Google Scholar
UK122 is a potent and selective urokinase-type plasminogen activator (uPA) inhibitor with an IC50 of 0.2 μM. UK122 shows no or little inhibition of tissue-type PA (tPA), plasmin, thrombin, and trypsin (all IC50>100 μM). UK122, 4-oxazolidinone analogue, is an anticancer agent and inhibits cancer cell migration and invasion.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 99.85%
- CAS No.: 940290-58-4
- 화학식: C19H14F3N3O4
- 분자량:405.33
-
보관:
-20°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
-
HY-N0171A
Beta-Sitosterol (purity>98%)
-
HY-B0190A
Nafamostat mesylate
-
HY-W018781
Benzamidine hydrochloride
-
HY-100626
WNK463
-
HY-151545
WNK1-IN-1
-
HY-137456
Tilpisertib
-
HY-118131
PKR-IN-C51
-
HY-114080
Patamostat
-
HY-112094S
WNK-IN-11-d3
-
HY-144820
JO146
-
HY-W018781R
Benzamidine hydrochloride (Standard)
-
HY-114080R
Patamostat (Standard)
Publications Citing Use of MedChemExpress (MCE) UK122 TFA
More
Biological Activity
UK122 (11.1, 33.3, 100 μM; 24 h) dose-dependently inhibits cell migration and significantly reduces the invasiveness of CFPAC-1 cells[1].
UK122 (10-100 μM; 48 h) has no effect of any cell growth or cell morphology change in CFPAC-1 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 940290-58-4
-
Appearance Solid
-
분자량 405.33
-
화학식 C19H14F3N3O4
-
Color White to yellow
-
SMILES
N=C(C1=CC=C(/C=C2N=C(C3=CC=CC=C3)OC/2=O)C=C1)N.OC(C(F)(F)F)=O
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
-20°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
Publications (3)
-
Journal Impact Factor
-
Most Recent
-
-
Genomics
Identification and multicenter validation of a 4-gene plasma signature for early recognition and risk assessment in hypertensive intracerebral hemorrhage. [Abstract]2026 May 30;118(4):111268. PMID: 42218946 -
bioRxiv
Modeling the role of urokinase plasminogen activator, uPA, and circulating Cancer-Associated Fibroblasts (cCAFS) in breast cancer cell extravasation. [Abstract]2025 Jun 17:2025.06.11.659108. PMID: 40667030
용액&용해도
DMSO : 14.29 mg/mL (35.26 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.43 mg/mL (3.53 mM); Clear solution
This protocol yields a clear solution of ≥ 1.43 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (14.3 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1.43 mg/mL (3.53 mM); Clear solution
This protocol yields a clear solution of ≥ 1.43 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (14.3 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (275 KB)
-
SDS (537 KB)
- English - EN (537 KB)
- Français - FR (537 KB)
- Deutsch - DE (537 KB)
- Norwegian - NO (537 KB)
- Español - ES (537 KB)
- Swedish - SV (537 KB)
- Italian - IT (537 KB)
- Korean - KR (537 KB)
- Portuguese - PT (537 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4671 mL | 12.3356 mL | 24.6713 mL | 61.6781 mL |
| 5 mM | 0.4934 mL | 2.4671 mL | 4.9343 mL | 12.3356 mL | |
| 10 mM | 0.2467 mL | 1.2336 mL | 2.4671 mL | 6.1678 mL | |
| 15 mM | 0.1645 mL | 0.8224 mL | 1.6448 mL | 4.1119 mL | |
| 20 mM | 0.1234 mL | 0.6168 mL | 1.2336 mL | 3.0839 mL | |
| 25 mM | 0.0987 mL | 0.4934 mL | 0.9869 mL | 2.4671 mL | |
| 30 mM | 0.0822 mL | 0.4112 mL | 0.8224 mL | 2.0559 mL |
UK122 TFA Related Classifications
HY-111056 Related Classifications
Powered by Bioz