Massoia lactone
Based on 1 publication(s) in Google Scholar
Massoia lactone ((±)-Massoia lactone) is a coconut and creamy fragrant compound mianly isolated from Cryptocarya massoy. Massoia lactone is also a fragrant biosurfactant produced by a fungus Aureobasidium pullulans.
For research use only. We do not sell to patients.
- Purity: 98.75%
- CAS No.: 54814-64-1
- Formula: C10H16O2
- Molecular Weight:168.23
-
Storage:Pure form -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
Publications Citing Use of MedChemExpress (MCE) Massoia lactone
More
Biological Activity
Chemical Information
-
CAS No. 54814-64-1
-
Appearance Liquid (Density: 0.9787 g/cm³)
-
Molecular Weight 168.23
-
Formula C10H16O2
-
Color Light yellow to light brown
-
SMILES
O=C1C=CCC(CCCCC)O1
-
Synonyms
(±)-Massoia lactone
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Pure form -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Nat Prod Res
α-Pyrone and decalin derivatives from the marine-derived fungus Trichoderma harzianum PSU-MF79. [Abstract]2022 Nov;36(21):5462-5469. PMID: 34894887
Solvent & Solubility
DMSO : 100 mg/mL (594.42 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (29.72 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (29.72 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (269 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 5.9442 mL | 29.7212 mL | 59.4424 mL | 148.6061 mL |
| 5 mM | 1.1888 mL | 5.9442 mL | 11.8885 mL | 29.7212 mL | |
| 10 mM | 0.5944 mL | 2.9721 mL | 5.9442 mL | 14.8606 mL | |
| 15 mM | 0.3963 mL | 1.9814 mL | 3.9628 mL | 9.9071 mL | |
| 20 mM | 0.2972 mL | 1.4861 mL | 2.9721 mL | 7.4303 mL | |
| 25 mM | 0.2378 mL | 1.1888 mL | 2.3777 mL | 5.9442 mL | |
| 30 mM | 0.1981 mL | 0.9907 mL | 1.9814 mL | 4.9535 mL | |
| 40 mM | 0.1486 mL | 0.7430 mL | 1.4861 mL | 3.7152 mL | |
| 50 mM | 0.1189 mL | 0.5944 mL | 1.1888 mL | 2.9721 mL | |
| 60 mM | 0.0991 mL | 0.4954 mL | 0.9907 mL | 2.4768 mL | |
| 80 mM | 0.0743 mL | 0.3715 mL | 0.7430 mL | 1.8576 mL | |
| 100 mM | 0.0594 mL | 0.2972 mL | 0.5944 mL | 1.4861 mL |