Sinomenine N-oxide
Based on 1 Customer Validation
Sinomenine N-oxide has anti-angiogenic, anti-inflammatory and anti-rheumatic effects. Sinomenine N-oxide is also a NO production inhibitor, with an IC50 value of 23.04 μM.
For research use only. We do not sell to patients.
- Purity: ≥99.0%
- CAS No.: 1000026-77-6
- Formula: C19H23NO5
- Molecular Weight:345.39
-
Storage:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Biological Activity
Chemical Information
-
CAS No. 1000026-77-6
-
Appearance Solid
-
Molecular Weight 345.39
-
Formula C19H23NO5
-
Color White to off-white
-
SMILES
OC1=C2[C@]34[C@@](C=C(C(C4)=O)OC)([H])[C@@H]([N@@+]([O-])(CC3)C)CC2=CC=C1OC
-
Synonyms
(+)-Sinomenine N-oxide
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Solvent & Solubility
DMSO : ≥ 100 mg/mL (289.53 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.24 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (7.24 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
[1]. Liu WJ, et al. Network pharmacology approach to elucidate possible action mechanisms of Sinomenii Caulis for treating osteoporosis. J Ethnopharmacol. 2020 Jul 15;257:112871. [Content Brief]
[2]. Zeng HL, et al. New N-oxide alkaloids from the stems of Sinomenium acutum. Fitoterapia. 2023 Mar;165:105404. [Content Brief]
[3]. Li Q, et al. Metabolic mechanism and anti-inflammation effects of sinomenine and its major metabolites N-demethylsinomenine and sinomenine-N-oxide. Life Sci. 2020 Nov 15;261:118433. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.8953 mL | 14.4764 mL | 28.9528 mL | 72.3819 mL |
| 5 mM | 0.5791 mL | 2.8953 mL | 5.7906 mL | 14.4764 mL | |
| 10 mM | 0.2895 mL | 1.4476 mL | 2.8953 mL | 7.2382 mL | |
| 15 mM | 0.1930 mL | 0.9651 mL | 1.9302 mL | 4.8255 mL | |
| 20 mM | 0.1448 mL | 0.7238 mL | 1.4476 mL | 3.6191 mL | |
| 25 mM | 0.1158 mL | 0.5791 mL | 1.1581 mL | 2.8953 mL | |
| 30 mM | 0.0965 mL | 0.4825 mL | 0.9651 mL | 2.4127 mL | |
| 40 mM | 0.0724 mL | 0.3619 mL | 0.7238 mL | 1.8095 mL | |
| 50 mM | 0.0579 mL | 0.2895 mL | 0.5791 mL | 1.4476 mL | |
| 60 mM | 0.0483 mL | 0.2413 mL | 0.4825 mL | 1.2064 mL | |
| 80 mM | 0.0362 mL | 0.1810 mL | 0.3619 mL | 0.9048 mL | |
| 100 mM | 0.0290 mL | 0.1448 mL | 0.2895 mL | 0.7238 mL |