SM-1295
Based on 1 Customer Validation
SM-1295 is an inhibitor of apoptosis protein (IAP) antagonist, with Kd values of 3077 nM, 3.2 nM and 9.5 nM for XIAP-BIR3, c-IAP1-BIR3 and c-IAP2-BIR3, respectively.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté : 98.71%
- CAS No.: 1562375-46-5
- Formule: C29H36BrN5O4
- Masse moléculaire:598.53
-
Stockage:
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Protocole
- Pureté et documentation
- Références
-
Help & FAQs
-
HY-125593
DasminapantIAP Antagonist -
HY-15518
LCL161IAP Inhibitor -
HY-109565
TolinapantIAP Antagonist -
HY-15989
SM-164IAP Antagonist -
HY-12600
AZD5582 -
HY-15454
XevinapantSmac Mimetic/IAPs Antagonist -
HY-13208
Xevinapant hydrochlorideIAPs Antagonist -
HY-12842
UC-112XIAP Inhibitor -
HY-138059
SM-433IAPs Inhibitor -
HY-17473
EmbelinXIAP Inhibitor -
HY-16701
BV6cIAP1/XIAP Antagonist -
HY-13638
GDC-0152IAP Inhibitor
Activité biologique
Description
IC50 & Target
Kd: 3077 nM (XIAP-BIR3), 3.2 nM (c-IAP1-BIR3), 9.5 nM (c-IAP2-BIR3)[2].
In Vitro
SM-1295 (compound 5) binds to both cIAP1 and cIAP2 proteins with Ki values of <10 nM and displays a selectivity of >900-fold for cIAP1 over XIAP[1].
SM-1295 (compound 5) exhibits an IC50 of 46 nM in MDA-MB-231[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1562375-46-5
-
Appearance Solid
-
Masse moléculaire 598.53
-
Formule C29H36BrN5O4
-
Color White to light yellow
-
SMILES
O=C([C@@H]1CC[C@@](CCN(C(CC2=CC=CC=C2)=O)C[C@@H]3NC([C@@H](NC)C)=O)([H])N1C3=O)NCC4=CC=C(Br)C=C4
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvant et solubilité
In Vitro:
DMSO : 310 mg/mL (517.94 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 7.75 mg/mL (12.95 mM); Clear solution
This protocol yields a clear solution of ≥ 7.75 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (77.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 7.75 mg/mL (12.95 mM); Clear solution
This protocol yields a clear solution of ≥ 7.75 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (77.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (275 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Haiying Sun, et al. Potent and Selective Small-Molecule Inhibitors of cIAP1/2 Proteins Reveal That the Binding of Smac Mimetics to XIAP BIR3 Is Not Required for Their Effective Induction of Cell Death in Tumor Cells. ACS Chem Biol. 2014 Apr 18;9(4):994-1002. [Content Brief]
[2]. Hui Cong, et al. Inhibitor of Apoptosis Protein (IAP) Antagonists in Anticancer Agent Discovery: Current Status and Perspectives. J Med Chem. 2019 Jun 27;62(12):5750-5772. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.6708 mL | 8.3538 mL | 16.7076 mL | 41.7690 mL |
| 5 mM | 0.3342 mL | 1.6708 mL | 3.3415 mL | 8.3538 mL | |
| 10 mM | 0.1671 mL | 0.8354 mL | 1.6708 mL | 4.1769 mL | |
| 15 mM | 0.1114 mL | 0.5569 mL | 1.1138 mL | 2.7846 mL | |
| 20 mM | 0.0835 mL | 0.4177 mL | 0.8354 mL | 2.0884 mL | |
| 25 mM | 0.0668 mL | 0.3342 mL | 0.6683 mL | 1.6708 mL | |
| 30 mM | 0.0557 mL | 0.2785 mL | 0.5569 mL | 1.3923 mL | |
| 40 mM | 0.0418 mL | 0.2088 mL | 0.4177 mL | 1.0442 mL | |
| 50 mM | 0.0334 mL | 0.1671 mL | 0.3342 mL | 0.8354 mL | |
| 60 mM | 0.0278 mL | 0.1392 mL | 0.2785 mL | 0.6961 mL | |
| 80 mM | 0.0209 mL | 0.1044 mL | 0.2088 mL | 0.5221 mL | |
| 100 mM | 0.0167 mL | 0.0835 mL | 0.1671 mL | 0.4177 mL |
SM-1295 Related Classifications
HY-124181 Related Classifications
Powered by Bioz