2,5-Furandimethanol
Based on 1 Customer Validation
2,5-Furandimethanol (2,5-Bis(hydroxymethyl)furan) is a building block for the enzymatic synthesis of bio-based polyesters. 2,5-Furandimethanol is also a metabolite of Phellinus linteus. 2,5-Furandimethanol affects leukemia. 2,5-Furandimethanol can be used in fungal infection research.
For research use only. We do not sell to patients.
- Purity: 99.71%
- CAS No.: 1883-75-6
- Formula: C6H8O3
- Molecular Weight:128.13
-
Storage:
-20°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
All Endogenous Metabolite Isoforms
More
Biological Activity
|
Fungal Metabolite |
2,5-Furandimethanol exhibits an MIC of >100 μg/mL in the Nadsonia fulvescens resistance test[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1883-75-6
-
Appearance Solid
-
Molecular Weight 128.13
-
Formula C6H8O3
-
Color Light yellow to yellow
-
SMILES
OCC1=CC=C(CO)O1
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
-20°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Solvent & Solubility
H2O : 100 mg/mL (780.46 mM; Need ultrasonic)
DMSO : 50 mg/mL (390.23 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (19.51 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (19.51 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Purity & Documentation
-
Data Sheet (271 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
Handling Instructions (2659 KB)
References
[1]. Schneider G, et al. Xylaramide, a new antifungal compound, and other secondary metabolites from Xylaria longipes. Z Naturforsch C J Biosci. 1996 Nov-Dec;51(11-12):802-6. [Content Brief]
[2]. Jiang Y, et al. Enzymatic synthesis of biobased polyesters using 2,5-bis(hydroxymethyl)furan as the building block. Biomacromolecules. 2014 Jul 14;15(7):2482-93. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO / H2O | 1 mM | 7.8046 mL | 39.0229 mL | 78.0457 mL | 195.1143 mL |
| 5 mM | 1.5609 mL | 7.8046 mL | 15.6091 mL | 39.0229 mL | |
| 10 mM | 0.7805 mL | 3.9023 mL | 7.8046 mL | 19.5114 mL | |
| 15 mM | 0.5203 mL | 2.6015 mL | 5.2030 mL | 13.0076 mL | |
| 20 mM | 0.3902 mL | 1.9511 mL | 3.9023 mL | 9.7557 mL | |
| 25 mM | 0.3122 mL | 1.5609 mL | 3.1218 mL | 7.8046 mL | |
| 30 mM | 0.2602 mL | 1.3008 mL | 2.6015 mL | 6.5038 mL | |
| 40 mM | 0.1951 mL | 0.9756 mL | 1.9511 mL | 4.8779 mL | |
| 50 mM | 0.1561 mL | 0.7805 mL | 1.5609 mL | 3.9023 mL | |
| 60 mM | 0.1301 mL | 0.6504 mL | 1.3008 mL | 3.2519 mL | |
| 80 mM | 0.0976 mL | 0.4878 mL | 0.9756 mL | 2.4389 mL | |
| 100 mM | 0.0780 mL | 0.3902 mL | 0.7805 mL | 1.9511 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
2,5-Furandimethanol Related Classifications
HY-W017782 Related Classifications
Powered by Bioz