PHT-427
Based on 2 publication(s) in Google Scholar
PHT-247 is an inhibitor of the pleckstrin homology (PH) domain of Akt, and it is also an inhibitor of PDPK1 with Kis of 2.7 µM and 5.2 µM and for Akt and PDPK1, respectively.
For research use only. We do not sell to patients.
- Purity: 98.09%
- CAS No.: 1191951-57-1
- Formula: C20H31N3O2S2
- Molecular Weight:409.61
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Publications Citing Use of MedChemExpress (MCE) PHT-427
More
Biological Activity
|
PDPK1 5.2 μM (Ki) |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| BXPC-3 | IC50 |
57 μM
Compound: 29
|
Cytotoxicity against human BxPC3 cells by MTT assay
Cytotoxicity against human BxPC3 cells by MTT assay
|
[PMID: 21353784] |
| BXPC-3 | IC50 |
6.3 μM
Compound: 14
|
Inhibition of Akt phosphorylation in human BxPC3 cells by Western blotting
Inhibition of Akt phosphorylation in human BxPC3 cells by Western blotting
|
[PMID: 19734051] |
| PANC-1 | IC50 |
6.3 μM
Compound: 66; PHT-427
|
Anticancer activity against human PANC-1 cells assessed as cell growth inhibition
Anticancer activity against human PANC-1 cells assessed as cell growth inhibition
|
[PMID: 36462440] |
The effects of PHT-427 on cell signaling are investigated by RPPA using a panel of 86 antibodies to phospho- and non-phosphorylated signaling protein related to PtdIns-3-K/PDPK1/Akt signaling in PC-3 prostate cells where PtdIns-3-K/PDPK1/Akt signaling is activated because of homozygous PTEN mutation. After 16 hours, a reduction is observed in phospho-Ser241-PDPK1 phospho-Thr308-Akt by both 10 µM PH-427 and 0.1 µM Wortmannin. Finally, phospho-Ser657-protein kinase C (PKC) and total SGK1 are decreased by treatment with both PHT-427 and Wortmannin. These results suggest that at 10 µM PHT-427 inhibits both Akt and PDKP1. The BxPC-3 and MiaPaCa-2 pancreatic cancer cell lines are probed by Western blotting following up to 24 hr exposure to 10 µM PHT-427, which is below the IC50 for cell growth inhibition of around 30 µM, to determine the effects of PHT-427 on of the PtdIns-3-K/PDPK1/Akt signaling pathway components[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1191951-57-1
-
Appearance Solid
-
Molecular Weight 409.61
-
Formula C20H31N3O2S2
-
Color White to off-white
-
SMILES
CCCCCCCCCCCCC1=CC=C(C=C1)S(NC2=NN=CS2)(=O)=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (2)
-
Journal Impact Factor
-
Most Recent
Solvent & Solubility
DMSO : 25 mg/mL (61.03 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.10 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocol
Panc-1 cells stably transfected with green fluorescent protein (GFP) tagged Akt or PDKP1 PH domains are serum starved in phenol red free growth medium on glass-bottom 96-well imaging plates for 16 hours. They are then treated with PHT-427 at 1, 5, and 10 µM or PI-103 for 4 hr, and stimulated with 50 ng/mL IGF-1 for 10 min. Images are taken before and after IGF-1 treatment using an IN Cell Analyzer 1000 instrument with a Nikon Plan Fluor ELWD 20X/0.45 objective loaded and using a 300msec exposure time[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Mice[1]
Female C57Bl/6 mice are administered PHT-427 as a single oral dose of 200 mg/kg. The mice are killed at different times (3 mice at each time point), blood collected into heparinized tubes and plasma prepared and stored frozen at -80°C. For assay 0.2 mL plasma is mixed with 0.2 mL of 0.1 M sodium phosphate buffer, pH 4.0, and extracted for 1 hr by inversion with 1 ml ethyl acetate. After centrifugation 0.8 mL of the organic layer is removed, evaporated under N2 and redissolved in 0.2 mL ethanol and 10 µL injected onto a Waters Quattro Ultima tandem mass spectrometer using a Phenomenex Luna 3.0 µm, 2.0×50 mm C8 analytical column with detection and quantification by multiple reaction monitoring with the mass spectrometer operating in electrospray positive ionization mode.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Purity & Documentation
-
Data Sheet (274 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4413 mL | 12.2067 mL | 24.4135 mL | 61.0337 mL |
| 5 mM | 0.4883 mL | 2.4413 mL | 4.8827 mL | 12.2067 mL | |
| 10 mM | 0.2441 mL | 1.2207 mL | 2.4413 mL | 6.1034 mL | |
| 15 mM | 0.1628 mL | 0.8138 mL | 1.6276 mL | 4.0689 mL | |
| 20 mM | 0.1221 mL | 0.6103 mL | 1.2207 mL | 3.0517 mL | |
| 25 mM | 0.0977 mL | 0.4883 mL | 0.9765 mL | 2.4413 mL | |
| 30 mM | 0.0814 mL | 0.4069 mL | 0.8138 mL | 2.0345 mL | |
| 40 mM | 0.0610 mL | 0.3052 mL | 0.6103 mL | 1.5258 mL | |
| 50 mM | 0.0488 mL | 0.2441 mL | 0.4883 mL | 1.2207 mL | |
| 60 mM | 0.0407 mL | 0.2034 mL | 0.4069 mL | 1.0172 mL |