Uzansertib
Based on 1 Customer Validation
Uzansertib (INCB053914) is an orally active, ATP-competitive pan-PIM kinase inhibitor with IC50s of 0.24 nM, 30 nM, 0.12 nM for PIM1, PIM2, PIM3, respectively. Uzansertib has broad anti-proliferative activity against a variety of hematologic tumor cell lines.
For research use only. We do not sell to patients.
- Purity: 99.45%
- CAS No.: 1620012-39-6
- Formula: C26H26F3N5O3
- Molecular Weight:513.51
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Epigenetics Compound Library
HY-L005
-
Immunology/Inflammation Compound Library
HY-L007
-
JAK/STAT Compound Library
HY-L008
-
Kinase Inhibitor Library
HY-L009
-
Anti-Cancer Compound Library
HY-L025
-
Clinical Compound Library
HY-L026
-
Drug Repurposing Compound Library
HY-L035
-
Orally Active Compound Library
HY-L061
-
Anti-Pancreatic Cancer Compound Library
HY-L077
-
Anti-Blood Cancer Compound Library
HY-L079
-
Anti-Cancer Metabolism Compound Library
HY-L083
-
Anti-Obesity Compound Library
HY-L087
-
Cancer Stem Cells Compound Library
HY-L135
-
Heterocyclic Compound Library
HY-L138
-
Anti-Hematopathy Compound Library
HY-L171
-
Multi-Target Compound Library
HY-L176
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Drug Repurposing Compound Library Plus
HY-L035P
-
Clinical Compound Library Plus
HY-L026P
-
Bioactive Compound Library
HY-L001
-
Protein Kinase Compound Library
HY-L196
-
High-Throughput Bioactive Compound Library
HY-L205
Biological Activity
|
PIM1 0.24 nM (IC50) |
PIM2 30 nM (IC50) |
PIM3 0.12 nM (IC50) |
Uzansertib inhibits proliferation in all multiple myeloma (MM) cell lines tested, with mean GI50 values ranging from 13.2 nM to 230.0 nM in AML, MM, DLBCL, MCL, and T-ALL cell lines[1].
Uzansertib (0.1, 0.3, 1, 3, 10, 30, 100, 300, 1000 nM) inhibits the phosphorylation of downstream PIM kinase substrates (p70S6K/S6 and 4E-BP1) in a dose-dependent manner in MOLM-16 (AML), Pfeiffer (DLBCL), and KMS-12-PE/BM (MM) cell lines[1].
PIM kinase-mediated phosphorylation of BAD in MOLM-16 and KMS-12-BM cells is particularly sensitive to inhibition by Uzansertib (mean IC50, 4 nM and 27 nM, respectively)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Uzansertib demonstrates a dose-dependent inhibition of BAD phosphorylation relative to vehicle at 4 hours post dose (MOLM-16 tumors, IC50=70 nM; KMS-12-BM tumors, IC50=145 nM) [1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Female immune compromised (severe combined immunodeficiency [SCID]) mice (5-9 weeks of age) bearing MOLM-16 (AML) or KMS-12-BM (MM)[1]
-
Dosage:25, 50, 75, 100 mg/kg
-
Administration:PO; twice a day; for 15 days
-
Result:Inhibited tumor growth in a dose-dependent manner in mice.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 1620012-39-6
-
Appearance Solid
-
Molecular Weight 513.51
-
Formula C26H26F3N5O3
-
Color White to off-white
-
SMILES
O=C(C1=NC(C2=C(F)C=CC=C2F)=C(F)C=C1)NC3=CN=C4C(CC[C@H]4O)=C3N5C[C@@H](N)[C@H](O)[C@@H](C)C5
-
Synonyms
INCB053914
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (194.74 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.87 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (4.87 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (277 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.9474 mL | 9.7369 mL | 19.4738 mL | 48.6845 mL |
| 5 mM | 0.3895 mL | 1.9474 mL | 3.8948 mL | 9.7369 mL | |
| 10 mM | 0.1947 mL | 0.9737 mL | 1.9474 mL | 4.8685 mL | |
| 15 mM | 0.1298 mL | 0.6491 mL | 1.2983 mL | 3.2456 mL | |
| 20 mM | 0.0974 mL | 0.4868 mL | 0.9737 mL | 2.4342 mL | |
| 25 mM | 0.0779 mL | 0.3895 mL | 0.7790 mL | 1.9474 mL | |
| 30 mM | 0.0649 mL | 0.3246 mL | 0.6491 mL | 1.6228 mL | |
| 40 mM | 0.0487 mL | 0.2434 mL | 0.4868 mL | 1.2171 mL | |
| 50 mM | 0.0389 mL | 0.1947 mL | 0.3895 mL | 0.9737 mL | |
| 60 mM | 0.0325 mL | 0.1623 mL | 0.3246 mL | 0.8114 mL | |
| 80 mM | 0.0243 mL | 0.1217 mL | 0.2434 mL | 0.6086 mL | |
| 100 mM | 0.0195 mL | 0.0974 mL | 0.1947 mL | 0.4868 mL |
Uzansertib Related Classifications
HY-101870 Related Classifications
Powered by Bioz