AZ304
Based on 1 Customer Validation
AZ304 is an ATP-competitive dual BRAF kinase inhibitor, potently inhibits wild type BRAF, V600E mutant BRAF and wild type CRAF, with IC50s of 79 nM, 38 nM and 68 nM, respectively. AZ304 also has significant effect on other kinases, such as p38 (IC50, 6 nM), CSF1R (IC50, 35 nM). Anti-tumor activity.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.77%
- CAS No.: 942507-42-8
- Formule: C27H25N5O2
- Masse moléculaire:451.52
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Activité biologique
|
BRafV600E 38 nM (IC50) |
BRAFWT 79 nM (IC50) |
CRAF 68 nM (IC50) |
p38 6 nM (IC50) |
CSF1R 35 nM (IC50) |
MAP3K7 6400 nM (IC50) |
CSK 7050 nM (IC50) |
AZ304 (1 nM-100 μM) potently reduces ERK phosphorylation (p-ERK), with a mean EC50 of 65 nM in the V600E mutant BRAF containing melanoma cell line A375, and EC50s of 52 nM, 60 nM in the wild type BRAF melanoma cell line SK-MEL-31 with and without EGF[1].
AZ304 also potently inhibits p-p38 in both BRAF genetic statuses cell lines[1].
AZ304 (0, 0.1, 1, 10, 100 μM, 48 and 72 hours) dose-dependently inhibits the growth of RKO, HT-29, DiFi, and Caco-2, with GI50s of 4.539 μM, 3.896 μM, 4.987 μM, 1.763 μM (48 hours) and 0.5032 μM, 0.3887 μM, 0.6354 μM, 0.3772 μM (72 hours), respectively[1].
AZ304 (2 μM, 36 and 48 hours) decreases BRAF, p-ERK, p-AKT and p-mTOR levels, increases p-EGFR in both BRAF V600E mutant and BRAF wild type cells. AZ304 down-regulates p-EGFR, inhibits p-ERK, more potently suppresses BRAF, ERK, AKT and mTOR signalling pathways in combination with C225[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:RKO, HT-29, DiFi, Caco-2 cells
-
Concentration:0, 0.1, 1, 10, 100 μM
-
Incubation Time:48, 72 hours
-
Result:Dose-dependently inhibited the growth of V600E mutant BRAF cell lines (RKO, HT-29) and wild-type BRAF cell lines (DiFi, Caco-2).
Chemical Information
-
CAS No. 942507-42-8
-
Appearance Solid
-
Masse moléculaire 451.52
-
Formule C27H25N5O2
-
Color White to off-white
-
SMILES
O=C(NC1=CC=C(C)C(NC2=C3C=CC(OC)=CC3=NC=N2)=C1)C4=CC=CC(C(C)(C#N)C)=C4
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvant et solubilité
DMSO : 125 mg/mL (276.84 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (4.61 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.08 mg/mL (4.61 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.08 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (276 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2147 mL | 11.0737 mL | 22.1474 mL | 55.3685 mL |
| 5 mM | 0.4429 mL | 2.2147 mL | 4.4295 mL | 11.0737 mL | |
| 10 mM | 0.2215 mL | 1.1074 mL | 2.2147 mL | 5.5369 mL | |
| 15 mM | 0.1476 mL | 0.7382 mL | 1.4765 mL | 3.6912 mL | |
| 20 mM | 0.1107 mL | 0.5537 mL | 1.1074 mL | 2.7684 mL | |
| 25 mM | 0.0886 mL | 0.4429 mL | 0.8859 mL | 2.2147 mL | |
| 30 mM | 0.0738 mL | 0.3691 mL | 0.7382 mL | 1.8456 mL | |
| 40 mM | 0.0554 mL | 0.2768 mL | 0.5537 mL | 1.3842 mL | |
| 50 mM | 0.0443 mL | 0.2215 mL | 0.4429 mL | 1.1074 mL | |
| 60 mM | 0.0369 mL | 0.1846 mL | 0.3691 mL | 0.9228 mL | |
| 80 mM | 0.0277 mL | 0.1384 mL | 0.2768 mL | 0.6921 mL | |
| 100 mM | 0.0221 mL | 0.1107 mL | 0.2215 mL | 0.5537 mL |