Y134
Based on 1 Customer Validation
Y134 is a selective and orally active oestrogen receptor (ER) modulator (SERM), exhibits potent antagonist activity at ERα and ERβ. Y134 shows 121.1-fold selectivity for ERα (Ki=0.09 nM) over ERβ (Ki=11.31 nM). Y134 inhibits oestrogen-stimulated proliferation of ER-positive human breast cancer cells.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.67%
- CAS No.: 849662-80-2
- Formule: C28H28N2O3S
- Masse moléculaire:472.60
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Anti-Cancer Compound Library
HY-L025
-
Orally Active Compound Library
HY-L061
-
Anti-Breast Cancer Compound Library
HY-L074
-
Nuclear Receptor Compound Library
HY-L126
-
Heterocyclic Compound Library
HY-L138
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Highly Selective Inhibitors Library
HY-L158
-
Anti-Ovarian Cancer Compound Library
HY-L173
-
Multi-Target Compound Library
HY-L176
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
Activité biologique
|
ERα 0.09 nM (Ki) |
ERβ 11.31 nM (Ki) |
Y134 exhibits potent antagonist activity at ERs in CV-1 cells cotransfected with plasmids containing ERα or ERβ and oestrogen-response element-driven luciferase, with IC50s of 0.52 nM for ERα and 2.94 nM for ERβ[1].
Y134 (0.01 nM-10 μM; 6 d) inhibits the oestrogen-stimulated ER-expressing breast cancer cell (MCF-7 and T47D) proliferation[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:MCF-7, T47, MDA-MB-231 cells
-
Concentration:0.01 nM-10 μM
-
Incubation Time:6 days
-
Result:Suppressed oestrogen-stimulated MCF-7 and T47D cell proliferation.
Showed no effects on MDA-MB-231 cells, except some cytotoxicity was seen at high concentrations.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Four-week old female Sprague-Dawley rats were received ovariectomy[1]
-
Dosage:1, 3 mg/kg
-
Administration:P.o. daily for 3 days
-
Result:Abolished the effect exerted by E2 in a dose-dependent manner.
Chemical Information
-
CAS No. 849662-80-2
-
Appearance Solid
-
Masse moléculaire 472.60
-
Formule C28H28N2O3S
-
Color Light yellow to yellow
-
SMILES
O=C(C1=C(C2=CC=C(O)C=C2)SC3=CC(O)=CC=C31)C4=CC=C(N5CCN(C(C)C)CC5)C=C4
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
DMSO : 100 mg/mL (211.60 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.29 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.29 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (278 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1160 mL | 10.5798 mL | 21.1595 mL | 52.8989 mL |
| 5 mM | 0.4232 mL | 2.1160 mL | 4.2319 mL | 10.5798 mL | |
| 10 mM | 0.2116 mL | 1.0580 mL | 2.1160 mL | 5.2899 mL | |
| 15 mM | 0.1411 mL | 0.7053 mL | 1.4106 mL | 3.5266 mL | |
| 20 mM | 0.1058 mL | 0.5290 mL | 1.0580 mL | 2.6449 mL | |
| 25 mM | 0.0846 mL | 0.4232 mL | 0.8464 mL | 2.1160 mL | |
| 30 mM | 0.0705 mL | 0.3527 mL | 0.7053 mL | 1.7633 mL | |
| 40 mM | 0.0529 mL | 0.2645 mL | 0.5290 mL | 1.3225 mL | |
| 50 mM | 0.0423 mL | 0.2116 mL | 0.4232 mL | 1.0580 mL | |
| 60 mM | 0.0353 mL | 0.1763 mL | 0.3527 mL | 0.8816 mL | |
| 80 mM | 0.0264 mL | 0.1322 mL | 0.2645 mL | 0.6612 mL | |
| 100 mM | 0.0212 mL | 0.1058 mL | 0.2116 mL | 0.5290 mL |
Y134 Related Classifications
HY-103457 Related Classifications
Powered by Bioz