Urolithin C
Based on 5 publication(s) in Google Scholar
Urolithin C, a gut-microbial metabolite of Ellagic acid, is a glucose-dependent activator of insulin secretion. Urolithin C is a L-type Ca2+ channel opener and enhances Ca2+ influx. Urolithin C induces cell apoptosis through a mitochondria-mediated pathway and also stimulates reactive oxygen species (ROS) formation.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.0%
- CAS No.: 165393-06-6
- Formule: C13H8O5
- Masse moléculaire:244.20
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Publications Citing Use of MedChemExpress (MCE) Urolithin C
MoreVoir tous les produits spécifiques à Isoform Calcium Channel
MoreVoir tous les produits spécifiques à Isoform Endogenous Metabolite
More
Activité biologique
|
L-type calcium channel |
Urolithin C (20-100 μM; 1 hour; INS-1 cells) treatment enhances glucose-induced extracellular signal-regulated kinases 1/2 (ERK1/2) activation in INS-1 β-cells[1].
?
Urolithin C significantly inhibits the proliferation of PC12 cells. Urolithin C treatment actively increases the lactate dehydrogenase (LDH) release and lipid peroxidation malondialdehyde (MDA), stimulates reactive oxygen species (ROS) formation and mitochondrial membrane depolarization, and caused calcium dyshomeostasis[2].
?
Urolithin C treatment induces apoptosis and S phase cell cycle arrest[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:INS-1 cells
-
Concentration:20 μM, 100 μM
-
Incubation Time:1 hour
-
Result:Enhanced glucose-induced extracellular signal-regulated kinases 1/2 (ERK1/2) activation.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 165393-06-6
-
Appearance Solid
-
Masse moléculaire 244.20
-
Formule C13H8O5
-
Color Light brown to brown
-
SMILES
O=C1C2=CC(O)=C(O)C=C2C3=CC=C(O)C=C3O1
-
Structure Classification
-
Initial Source
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (5)
-
Journal Impact Factor
-
Most Recent
-
Cell Discov
Cancer cells sense solid stress to enhance metastasis by CKAP4 phase separation-mediated microtubule branching. [Abstract]2024 Nov 12;10(1):114. PMID: 39528501 -
Ecotoxicol Environ Saf
CDK5-USP30 signaling pathway regulates MAVS-mediated inflammation via suppressing mitophagy in MPTP/MPP+ PD model. [Abstract]2024 Jul 1:279:116446. PMID: 38772138 -
Int Immunopharmacol
The ellagitannin metabolite urolithin C attenuated cognitive impairment by inhibiting neuroinflammation via downregulation of MAPK/NF-kB signaling pathways in aging mice. [Abstract]2024 Sep 19;142(Pt B):113151. PMID: 39303538 -
Naunyn Schmiedebergs Arch Pharmacol
Urolithin C reveals anti-NAFLD potential via AMPK-ferroptosis axis and modulating gut microbiota. [Abstract]2023 Oct;396(10):2687-2699. PMID: 37126194 -
Solvant et solubilité
DMSO : 50 mg/mL (204.75 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (8.52 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (8.52 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (278 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Slimane Toubal, et al. Urolithin C Increases Glucose-Induced ERK Activation Which Contributes to Insulin Secretion. Fundam Clin Pharmacol. 2020 Feb 21. [Content Brief]
[3]. Morgane Bayle, et al. Development and Validation of a Liquid Chromatography-Electrospray Ionization-Tandem Mass Spectrometry Method for the Determination of Urolithin C in Rat Plasma and Its Application to a Pharmacokinetic Study. J Pharm Biomed Anal. 2016 Nov 30;131:33-39. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 4.0950 mL | 20.4750 mL | 40.9500 mL | 102.3751 mL |
| 5 mM | 0.8190 mL | 4.0950 mL | 8.1900 mL | 20.4750 mL | |
| 10 mM | 0.4095 mL | 2.0475 mL | 4.0950 mL | 10.2375 mL | |
| 15 mM | 0.2730 mL | 1.3650 mL | 2.7300 mL | 6.8250 mL | |
| 20 mM | 0.2048 mL | 1.0238 mL | 2.0475 mL | 5.1188 mL | |
| 25 mM | 0.1638 mL | 0.8190 mL | 1.6380 mL | 4.0950 mL | |
| 30 mM | 0.1365 mL | 0.6825 mL | 1.3650 mL | 3.4125 mL | |
| 40 mM | 0.1024 mL | 0.5119 mL | 1.0238 mL | 2.5594 mL | |
| 50 mM | 0.0819 mL | 0.4095 mL | 0.8190 mL | 2.0475 mL | |
| 60 mM | 0.0683 mL | 0.3413 mL | 0.6825 mL | 1.7063 mL | |
| 80 mM | 0.0512 mL | 0.2559 mL | 0.5119 mL | 1.2797 mL | |
| 100 mM | 0.0410 mL | 0.2048 mL | 0.4095 mL | 1.0238 mL |