Bractoppin
Based on 3 publication(s) in Google Scholar
Bractoppin is a potent and selective agent-like inhibitor of phosphopeptide recognition by the human BRCA1 tandem(t) BRCT domain (binding IC50: 74 nM). Bractoppin diminishes BRCA1 recruitment to DNA breaks, in turn suppressing damage-induced G2 arrest and assembly of the recombinase, RAD51. Bractoppin preferentially inhibits BRCA1 tBRCT-dependent steps in the DNA damage response.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 99.90%
- No. CAS: 2290527-07-8
- Fòrmula: C25H23FN4O
- Peso molecular:414.47
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
-
Cell Cycle/DNA Damage Compound Library
HY-L004
-
Anti-Cancer Compound Library
HY-L025
-
Anti-Aging Compound Library
HY-L034
-
Cancer Stem Cells Compound Library
HY-L135
-
Highly Selective Inhibitors Library
HY-L158
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
Publications Citing Use of MedChemExpress (MCE) Bractoppin
MoreVer todos los productos específicos de isoformas DNA/RNA Synthesis
More
Actividad biológica
In a MST assay, Bractoppin exhibits nanomolar potency in displacing cognate BACH1 phosphopeptide substrate from the BRCA1 tBRCT, the binding IC50 value is 74 nM[1].In a selectivity profile by competitive MST assay, Bractoppin (0-100 μM) does not detectably bind to fluorescently labeled tBRCT domains from MCPH1, TOPBP1 7/8, ECT2, or TOPBP1 1/2[1].Bractoppin (100?μM) selectively inhibits damage-induced BRCA1 foci formation, but has little effect on the radiation-induced accumulation of MDC1 at sites of DNA damage. Similarly, Bractoppin has little effect on the radiation-induced recruitment of TOPBP1 (a protein containing multiple, structurally related tBRCT domains)[1].Bractoppin (10-100 μM; 0.5 hr before radiation (32 hours)) inhibits 4Gy radiation induced G2 arrest in a dose-dependent manner. The percentage of G2 arrest cell is 64%, 42% and 25% for 10 μM, 30 μM and 100 μM, respectively[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
No. CAS 2290527-07-8
-
Appearance Solid
-
Peso molecular 414.47
-
Fòrmula C25H23FN4O
-
Color White to off-white
-
SMILES
O=C(N1CCN(CC2=CC=CC=C2F)CC1)C3=CC=C4NC(C5=CC=CC=C5)=NC4=C3
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (3)
-
Journal Impact Factor
-
Most Recent
-
BMC Biol
CDK1 mediates the metabolic regulation of DNA double-strand break repair in metaphase II oocytes. [Abstract]2025 Feb 6;23(1):37. PMID: 39915808 -
Molecules
2022 Sep 21;27(19):6219. PMID: 36234755 -
Biochem Biophys Res Commun
Bractoppin, a BRCA1 carboxy-terminal domain (BRCT) inhibitor, suppresses tumor progression in ovarian borderline tumor organoids. [Abstract]2023 Jan 1:638:76-83. PMID: 36442235
Solvente y solubilidad
DMSO : 250 mg/mL (603.18 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (5.02 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (5.02 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (272 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4127 mL | 12.0636 mL | 24.1272 mL | 60.3180 mL |
| 5 mM | 0.4825 mL | 2.4127 mL | 4.8254 mL | 12.0636 mL | |
| 10 mM | 0.2413 mL | 1.2064 mL | 2.4127 mL | 6.0318 mL | |
| 15 mM | 0.1608 mL | 0.8042 mL | 1.6085 mL | 4.0212 mL | |
| 20 mM | 0.1206 mL | 0.6032 mL | 1.2064 mL | 3.0159 mL | |
| 25 mM | 0.0965 mL | 0.4825 mL | 0.9651 mL | 2.4127 mL | |
| 30 mM | 0.0804 mL | 0.4021 mL | 0.8042 mL | 2.0106 mL | |
| 40 mM | 0.0603 mL | 0.3016 mL | 0.6032 mL | 1.5079 mL | |
| 50 mM | 0.0483 mL | 0.2413 mL | 0.4825 mL | 1.2064 mL | |
| 60 mM | 0.0402 mL | 0.2011 mL | 0.4021 mL | 1.0053 mL | |
| 80 mM | 0.0302 mL | 0.1508 mL | 0.3016 mL | 0.7540 mL | |
| 100 mM | 0.0241 mL | 0.1206 mL | 0.2413 mL | 0.6032 mL |
Bractoppin Related Classifications
HY-126020 Related Classifications
Powered by Bioz