AB-MECA
Based on 1 publication(s) in Google Scholar
AB-MECA is a high affinity A3 adenosine receptor agonist with a binding Ki of 430.5 nM for human A3 receptors in CHO cells. AB-MECA can enhance plasma histamine level.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 98.32%
- No. CAS: 152918-26-8
- Fòrmula: C18H21N7O4
- Peso molecular:399.40
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
-
Neurotransmitter Receptor Compound Library
HY-L062
-
Anti-Lung Cancer Compound Library
HY-L075
-
Human Metabolite Library
HY-L123
-
Membrane Protein-targeted Compound Library
HY-L149
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Bioactive Compound Library Max
HY-L181
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Mass Spectrometry Human Metabolite Library
HY-L215
-
Lactylation Compound Library
HY-L249
-
GPCR/G Protein Compound Library
HY-L006
-
Small Molecule Immuno-Oncology Compound Library
HY-L031
Publications Citing Use of MedChemExpress (MCE) AB-MECA
MoreVer todos los productos específicos de isoformas Adenosine Receptor
More
Actividad biológica
|
Adenosine A3 receptor |
AB-MECA (1, 10, 100 μM; 24 hours) shows dose-dependent cytotoxicity in human lung cancer cell line A549[2].
[125I]AB-MECA has KD values for binding to A3 receptors in transfected CHO cells and in RBL-2H3 cells are 1.48 and 3.61 nM, respectively[3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:A549 cell
-
Concentration:1, 10, 100 μM
-
Incubation Time:24 hours
-
Result:Shown dose-dependent cytotoxicity.
AB-MECA (0.3 mg/kg; iv) enhances antigen-induced bronchoconstriction in male albino guinea pigs, weighing 180-220 g[5].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male Balb/c mice, weighing 18-25 g[4]
-
Dosage:3 ug/kg
-
Administration:IV; single dose
-
Result:Induced a 5.9-fold increase in histamine levels in murine plasma.
Chemical Information
-
No. CAS 152918-26-8
-
Appearance Solid
-
Peso molecular 399.40
-
Fòrmula C18H21N7O4
-
Color White to off-white
-
SMILES
O[C@H]1[C@H](N2C=NC3=C(NCC4=CC=C(N)C=C4)N=CN=C23)O[C@H](C(NC)=O)[C@H]1O
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
bioRxiv
2024 Jul 26:2024.07.26.605282. PMID: 39091869
Solvente y solubilidad
DMSO : 55 mg/mL (137.71 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.75 mg/mL (6.89 mM); Clear solution
This protocol yields a clear solution of ≥ 2.75 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (27.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.75 mg/mL (6.89 mM); Clear solution
This protocol yields a clear solution of ≥ 2.75 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (27.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (276 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
[1]. L Yates, et al. Radioligand binding and functional responses of ligands for human recombinant adenosine A(3) receptors. Auton Autacoid Pharmacol. 2006 Apr;26(2):191-200. [Content Brief]
[3]. X D Ji, et al. A selective agonist affinity label for A3 adenosine receptors. Biochem Biophys Res Commun. 1994 Aug 30;203(1):570-6. [Content Brief]
[4]. Endre G Mikus, et al. Interaction of SSR161421, a novel specific adenosine A(3) receptor antagonist with adenosine A(3) receptor agonists both in vitro and in vivo. Eur J Pharmacol. 2013 Jan 15;699(1-3):62-6. [Content Brief]
[5]. Endre G Mikus, et al. Evaluation of SSR161421, a novel orally active adenosine A3 receptor antagonist on pharmacology models. Eur J Pharmacol. 2013 Jan 15;699(1-3):172-9. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.5038 mL | 12.5188 mL | 25.0376 mL | 62.5939 mL |
| 5 mM | 0.5008 mL | 2.5038 mL | 5.0075 mL | 12.5188 mL | |
| 10 mM | 0.2504 mL | 1.2519 mL | 2.5038 mL | 6.2594 mL | |
| 15 mM | 0.1669 mL | 0.8346 mL | 1.6692 mL | 4.1729 mL | |
| 20 mM | 0.1252 mL | 0.6259 mL | 1.2519 mL | 3.1297 mL | |
| 25 mM | 0.1002 mL | 0.5008 mL | 1.0015 mL | 2.5038 mL | |
| 30 mM | 0.0835 mL | 0.4173 mL | 0.8346 mL | 2.0865 mL | |
| 40 mM | 0.0626 mL | 0.3130 mL | 0.6259 mL | 1.5648 mL | |
| 50 mM | 0.0501 mL | 0.2504 mL | 0.5008 mL | 1.2519 mL | |
| 60 mM | 0.0417 mL | 0.2086 mL | 0.4173 mL | 1.0432 mL | |
| 80 mM | 0.0313 mL | 0.1565 mL | 0.3130 mL | 0.7824 mL | |
| 100 mM | 0.0250 mL | 0.1252 mL | 0.2504 mL | 0.6259 mL |
AB-MECA Related Classifications
HY-19365 Related Classifications
Powered by Bioz