ATB107
Based on 1 Customer Validation
ATB107 is a potent inhibitor of indole-3-glycerol phosphate synthase (IGPS) with a KD of 3 μM.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza : 99.36%
- No. CAS: 455325-51-6
- Fòrmula: C21H28N8
- Peso molecular:392.50
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Protocolo
- Pureza y Documentación
- Referencias
-
Help & FAQs
Ver todos los productos específicos de isoformas DNA/RNA Synthesis
More
Actividad biológica
Descripciòn
IC50 & Target
KD: 3 μM (IGPS)[1]
In Vitro
The minimum inhibitory concentration (MIC) of ATB107 is 0.1 μg/mL for M. tuberculosis H37Ra. ATB107 also has high activity against M. tuberculosis H37Rv, with an MIC of 0.1 μg/mL. All 50 fully susceptible clinical isolates tested are susceptible to ATB107 at 1 μg/mL; of these, 41 (82%) are susceptible to ATB107 at 0.1 μg/mL. The results also show that 67 (83.8%) multidrug-resistant TB (MDR-TB) isolates are susceptible to ATB107 at 1 μg/mL, and 25 (31.3%) isolates are susceptible to ATB107 at 0.1 μg/mL. Results show that the binding ability of ATB107 is well correlated with its concentrations. At the highest concentration of 200 μg/mL, ATB107 can inhibit cell proliferation, with cell survival of about 60%. With the lower concentration of 50 μg/mL, cell survival is more than 80% for ATB107[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
No. CAS 455325-51-6
-
Appearance Solid
-
Peso molecular 392.50
-
Fòrmula C21H28N8
-
Color Off-white to light yellow
-
SMILES
C1(N2CCCCC2)=NC(NC3=CC=CC=C3)=NC(N/N=C4CN5CCC\4CC5)=N1
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvente y solubilidad
In Vitro:
DMSO : ≥ 100 mg/mL (254.78 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.37 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.37 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocolo
Kinase Assay[1]
The concentration of mIGPS is determined. The substrate CdRP is chemically synthesized, with a yield of 30 mM. Ten microliters of 30 mM CdRP and 10 μL of 1.24 μM IGPS are added to 480 μL of 5 mM Tris/HCl (pH 7.0), and incubated at 37°C for 20 min. The enzyme activity is measured with a spectrophotometer by following the increase in absorbance of the solution at 280 nm. ATB107 is added to the assay mixture to obtain concentrations of 10-4 M, 7.5×10-5 M, 5×10-5 M, 2.5×10-5 M, and 10-5 M, respectively[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Cell Assay[1]
The tetrazolium dye reduction assay [3-[4,5-dim-ethylthiazol-2-yl]-2,5-diphenyl-tetrazolium bromide (MTT)] is used to determine the effect of ATB107 on cell survival and growth. At first, the THP-1 macrophage cells are inoculated at 8×104 cells/mL) into 96-well plates and incubated at 37°C in a 5% CO2/95% air atmosphere for 24 h. ATB107 is added to give concentrations of 50,100, 150 and 200 μg/mL. After incubation of cells treated with ATB107 for 12 h, 20 μL (5 g/L) of MTT solution is added to each well; this is followed by incubation for another 4 h to allow the formation of formazan crystals. Finally, 10% SDS is added to dissolve the formazan crystals, and the plates are read on a microplate reader at 570 nm. Controls are included in which only culture media are added to wells containing cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Pureza y Documentación
-
Ficha de datos (276 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.5478 mL | 12.7389 mL | 25.4777 mL | 63.6943 mL |
| 5 mM | 0.5096 mL | 2.5478 mL | 5.0955 mL | 12.7389 mL | |
| 10 mM | 0.2548 mL | 1.2739 mL | 2.5478 mL | 6.3694 mL | |
| 15 mM | 0.1699 mL | 0.8493 mL | 1.6985 mL | 4.2463 mL | |
| 20 mM | 0.1274 mL | 0.6369 mL | 1.2739 mL | 3.1847 mL | |
| 25 mM | 0.1019 mL | 0.5096 mL | 1.0191 mL | 2.5478 mL | |
| 30 mM | 0.0849 mL | 0.4246 mL | 0.8493 mL | 2.1231 mL | |
| 40 mM | 0.0637 mL | 0.3185 mL | 0.6369 mL | 1.5924 mL | |
| 50 mM | 0.0510 mL | 0.2548 mL | 0.5096 mL | 1.2739 mL | |
| 60 mM | 0.0425 mL | 0.2123 mL | 0.4246 mL | 1.0616 mL | |
| 80 mM | 0.0318 mL | 0.1592 mL | 0.3185 mL | 0.7962 mL | |
| 100 mM | 0.0255 mL | 0.1274 mL | 0.2548 mL | 0.6369 mL |
ATB107 Related Classifications
HY-76212 Related Classifications
Powered by Bioz