FR 167653
Based on 1 Customer Validation
FR 167653 (FR 167653 sulfate), an orally active and selective p38 MAPK inhibitor, is a potent suppressor of TNF-α and IL-1β production via specific inhibition of p38 MAPK activity. FR 167653 (FR 167653 sulfate) is effective in treating inflammation, relieving trauma and ischemia-reperfusion injury in vivo.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza : 99.87%
- No. CAS: 158876-66-5
- Fòrmula: C24H20FN5O6S
- Peso molecular:525.51
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Protocolo
- Pureza y Documentación
- Referencias
-
Help & FAQs
-
HY-11068
SB 239063p38 MAPK Inhibitor -
HY-10456
TAK-715p38 MAPK Inhibitor -
HY-13241
Ralimetinib dimesylateApoptosis Inducer -
HY-12511
SKF-86002p38 MAPK Inhibitor -
HY-18306
SB 242235p38 MAPK Inhibitor -
HY-11087
SD 0006p38α Selective Inhibitor -
HY-15505
RWJ-67657p38α/β Inhibitor -
HY-112389
p38 MAP Kinase Inhibitor IIIp38 MAPK Inhibitor -
HY-112466
p38 MAPK-IN-4p38 MAPK Inhibitor -
HY-10256
Adezmapimodp38 MAPK Inhibitor -
HY-10295
SB 202190p38 MAPK Inhibitor -
HY-10320
Doramapimodp38 MAPK Inhibitor
Actividad biológica
Descripciòn
IC50 & Target
p38 MAPK[1]
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Inbred male Balbuc mice (aged 8 weeks)[1]
-
Dosage:32 kg/mg
-
Administration:Subcutaneous injection; 24-48 hours
-
Result:The scores of acute tubular necrosis in FR-167653-treated mice were significantly lower in vehicle-treated mice at 24 and 48 h after ischaemiaureperfusion both in cortex and outer medulla.
Chemical Information
-
No. CAS 158876-66-5
-
Appearance Solid
-
Peso molecular 525.51
-
Fòrmula C24H20FN5O6S
-
Color Light yellow to yellow
-
SMILES
O=C(N1NC2=C(C3=CC=NC=C3)C(C4=CC=C(F)C=C4)=NN2CC1)C(C5=CC=CC=C5)=O.O=S(O)(O)=O
-
Synonyms
FR 167653 sulfate
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvente y solubilidad
In Vitro:
DMSO : 100 mg/mL (190.29 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.76 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (4.76 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (277 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
[1]. Furuichi K, et al. Administration of FR167653, a new anti-inflammatory compound, prevents renal ischaemia/reperfusion injury in mice. Nephrol Dial Transplant. 2002 Mar;17(3):399-407. [Content Brief]
[2]. Iwata Y, et al. p38 Mitogen-activated protein kinase contributes to autoimmune renal injury in MRL-Fas lpr mice. J Am Soc Nephrol. 2003 Jan;14(1):57-67. [Content Brief]
[3]. Kawashima Y, et al. FR167653 attenuates ischemia and reperfusion injury of the rat lung with suppressing p38mitogen-activated protein kinase. J Heart Lung Transplant. 2001 May;20(5):568-74. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.9029 mL | 9.5146 mL | 19.0291 mL | 47.5728 mL |
| 5 mM | 0.3806 mL | 1.9029 mL | 3.8058 mL | 9.5146 mL | |
| 10 mM | 0.1903 mL | 0.9515 mL | 1.9029 mL | 4.7573 mL | |
| 15 mM | 0.1269 mL | 0.6343 mL | 1.2686 mL | 3.1715 mL | |
| 20 mM | 0.0951 mL | 0.4757 mL | 0.9515 mL | 2.3786 mL | |
| 25 mM | 0.0761 mL | 0.3806 mL | 0.7612 mL | 1.9029 mL | |
| 30 mM | 0.0634 mL | 0.3172 mL | 0.6343 mL | 1.5858 mL | |
| 40 mM | 0.0476 mL | 0.2379 mL | 0.4757 mL | 1.1893 mL | |
| 50 mM | 0.0381 mL | 0.1903 mL | 0.3806 mL | 0.9515 mL | |
| 60 mM | 0.0317 mL | 0.1586 mL | 0.3172 mL | 0.7929 mL | |
| 80 mM | 0.0238 mL | 0.1189 mL | 0.2379 mL | 0.5947 mL | |
| 100 mM | 0.0190 mL | 0.0951 mL | 0.1903 mL | 0.4757 mL |
FR 167653 Related Classifications
HY-18754A Related Classifications
Powered by Bioz