FTI-2153
Based on 1 Customer Validation
FTI-2153 is a potent and highly selective inhibitor of farnesyltransferase (FTase), with an IC50 of 1.4 nM. FTI-2153 is >3000-fold more potent at blocking H-Ras (IC50, 10 nM) than Rap1A processing. Anti-cancer activity.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 99.77%
- No. CAS: 344900-92-1
- Fòrmula: C25H30N4O3S
- Peso molecular:466.60
-
Almacenamiento:
-20°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
-
Metabolism/Protease Compound Library
HY-L012
-
Anti-Cancer Compound Library
HY-L025
-
Anti-Lung Cancer Compound Library
HY-L075
-
Anti-Pancreatic Cancer Compound Library
HY-L077
-
Targeted Diversity Library
HY-L099
-
Metabolic Enzyme Compound Library
HY-L146
-
Highly Selective Inhibitors Library
HY-L158
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Posttranslational Modification Library
HY-L226
Actividad biológica
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HT-1080 | IC50 |
>50 μM
Compound: FT-2153
|
Cytotoxicity against human HT1080 cells
Cytotoxicity against human HT1080 cells
|
[PMID: 23953690] |
| NIH3T3 | ED50 |
25 μM
Compound: 23 (FTI-2153)
|
Effective dose against murine 3T3 fibroblasts cells
Effective dose against murine 3T3 fibroblasts cells
|
[PMID: 14711313] |
| NIH3T3 | IC50 |
0.02 μM
Compound: 13(FTI-2153)
|
Inhibition of mammalian H-Ras processing in NIH 3T3 cells
Inhibition of mammalian H-Ras processing in NIH 3T3 cells
|
[PMID: 11277514] |
FTI-2153, inhibits bipolar spindle formation during mitosis in two human lung cancer cell lines[2].
FTI-2153 increases the percentage of prometaphase cells with ring-like DNA morphology in transformed and non-transformed cells[2].
FTI-2153 (15 μM) inhibits T-24 and Calu-1 cell growth by 38 and 36%, respectively. NIH3T3, HFF and HT-1080 are less sensitive and are inhibited by only 8, 8 and 13%, respectively. A-549 and OVCAR3 cell growth is inhibited by 25 and 22%, respectively. Thus, even though T-24 and Calu-1 cells are equisensitive to FTI-2153 cell growth inhibition, FTI-2153 inhibits bipolar spindle formation only in Calu-1 cells. HFF and NIH3T3 cells are both resistant to FTI2153 growth inhibition, yet only NIH3T3 cells are resistant to FTI-2153 inhibition of bipolar spindle formation[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:NIH3T3, HFF, HT1080, T-24, OVCAR3, A-549 and Calu-1 CELLS.
-
Concentration:48 h.
-
Incubation Time:15 μM.
-
Result:When A-549 cells were treated with FTI-2153 (15 μM for 48 h), the proportion of cells at prometaphase increased relative to the other phases of mitosis.
FTI-2153 accumulated cells at prometaphase with a rosette-like morphology where chromosomes form a ring surrounding a monoaster of microtubules.
In all cells, except for T-24 and NIH3T3, FTI-2153 treatment increased the proportion of mitotic cells in prometaphase and decreased the percentage of cells in telophase/cytokinesis.
In HT1080 cells, the percentage of cells in prometaphase and telophase/ cytokinesis were 5 and 85% in control cells and 55 and 35% in Treated cells, respectively. Similarly results were also found in HFF cells. Calu-1 and A-549 cells, as described previously, had similarly large changes, whereas OVCAR3 had smaller changes. In contrast, FTI-2153 did not significantly affect the distribution of the different phases of mitosis in T-24 and NIH3T3 cells.
Chemical Information
-
No. CAS 344900-92-1
-
Appearance Solid
-
Peso molecular 466.60
-
Fòrmula C25H30N4O3S
-
Color Off-white to light yellow
-
SMILES
CSCC[C@@H](C(OC)=O)NC(C1=CC=C(CNCC2=CN=CN2)C=C1C3=CC=CC=C3C)=O
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
-20°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Solvente y solubilidad
DMSO : 90 mg/mL (192.88 mM; Need ultrasonic and warming; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.36 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.36 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (274 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
[1]. Sun J, et al. Antitumor efficacy of a novel class of non-thiol-containing peptidomimetic inhibitors of farnesyltransferase and geranylgeranyltransferase I: combination therapy with the cytotoxic agents cisplatin, Taxol, and gemcitabine. Cancer Res. 1999 Oct 1;59(19):4919-26. [Content Brief]
[2]. N C Crespo, et al. The farnesyltransferase inhibitor, FTI-2153, inhibits bipolar spindle formation during mitosis independently of transformation and Ras and p53 mutation status. Cell Death Differ. 2002 Jul;9(7):702-9. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1432 mL | 10.7158 mL | 21.4316 mL | 53.5791 mL |
| 5 mM | 0.4286 mL | 2.1432 mL | 4.2863 mL | 10.7158 mL | |
| 10 mM | 0.2143 mL | 1.0716 mL | 2.1432 mL | 5.3579 mL | |
| 15 mM | 0.1429 mL | 0.7144 mL | 1.4288 mL | 3.5719 mL | |
| 20 mM | 0.1072 mL | 0.5358 mL | 1.0716 mL | 2.6790 mL | |
| 25 mM | 0.0857 mL | 0.4286 mL | 0.8573 mL | 2.1432 mL | |
| 30 mM | 0.0714 mL | 0.3572 mL | 0.7144 mL | 1.7860 mL | |
| 40 mM | 0.0536 mL | 0.2679 mL | 0.5358 mL | 1.3395 mL | |
| 50 mM | 0.0429 mL | 0.2143 mL | 0.4286 mL | 1.0716 mL | |
| 60 mM | 0.0357 mL | 0.1786 mL | 0.3572 mL | 0.8930 mL | |
| 80 mM | 0.0268 mL | 0.1339 mL | 0.2679 mL | 0.6697 mL | |
| 100 mM | 0.0214 mL | 0.1072 mL | 0.2143 mL | 0.5358 mL |
FTI-2153 Related Classifications
HY-123242 Related Classifications
Powered by Bioz