JNJ-41443532
Based on 1 Customer Validation
JNJ-41443532 (CCR2 antagonist 5) is a selective, orally active hCCR2 inhibitor with good binding affinity (IC50=37 nM) and potent functional antagonism (chemotaxis IC50=30 nM). JNJ-41443532 displays a Ki of 9.6 µM for mCCR2 binding. JNJ-41443532 can be used in the research of inflammatory disease.
For research use only. We do not sell to patients.
- Purity: 99.65%
- CAS No.: 1228650-83-6
- Formula: C22H25F3N4O3S
- Molecular Weight:482.52
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
|
hCCR2 37 nM (IC50) |
mCCR2 9.6 μM (Ki) |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HEK293 | IC50 |
>50 μM
Compound: 8d
|
Displacement of [3H]-astemizole from human ERG expressed in HEK293 cells after 1 hr by scintillation counting analysis
Displacement of [3H]-astemizole from human ERG expressed in HEK293 cells after 1 hr by scintillation counting analysis
|
[PMID: 24900425] |
| THP-1 | IC50 |
30 nM
Compound: 8d
|
Antagonist activity against CCR2 in human THP-1 cells assessed as inhibition of MCP-1 induced chemotaxis after 3 hrs
Antagonist activity against CCR2 in human THP-1 cells assessed as inhibition of MCP-1 induced chemotaxis after 3 hrs
|
[PMID: 24900425] |
| THP-1 | IC50 |
37 nM
Compound: 8d
|
Displacement of [125I]-MCP-1 from CCR2 in human THP-1 cells after 2 hrs by microplate scintillation and luminescence counter analysis
Displacement of [125I]-MCP-1 from CCR2 in human THP-1 cells after 2 hrs by microplate scintillation and luminescence counter analysis
|
[PMID: 24900425] |
JNJ-41443532 has good CV safety profile. It does not induce dose-dependent or notable effects on most cardiohemodynamic, functional respiratory and electrophysiological parameters up to 10 mg/kg (i.v.) with plasma level at 70 µM in an anesthetized dog[1].
JNJ-41443532 has amendable oral bioavailability in dogs and primates. Pharmacokinetic parameters (p.o.)[1]:
| Species | Dose (mg/kg) |
Cmax (ng/mL) |
AUClast (h*ng/mL) |
Oral bioavailability (%) |
| dogs | 6.7 | 1617 | 5887 | 70.2 |
| non-human primates | 7.2 | 740 | 3061 | 25.4 |
| mice | 10 | 74 | 204 | 19 |
| rats | 10 | 100 | 416 | 15.3 |
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 1228650-83-6
-
Appearance Solid
-
Molecular Weight 482.52
-
Formula C22H25F3N4O3S
-
Color White to off-white
-
SMILES
O=C(CNC(C1=CC(C(F)(F)F)=CC=C1)=O)NC2CN(C2)[C@](CC3)([H])CC[C@@]3(C4=CN=CS4)O
-
Synonyms
CCR2 antagonist 5
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (207.25 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.18 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.18 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (272 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0725 mL | 10.3623 mL | 20.7245 mL | 51.8113 mL |
| 5 mM | 0.4145 mL | 2.0725 mL | 4.1449 mL | 10.3623 mL | |
| 10 mM | 0.2072 mL | 1.0362 mL | 2.0725 mL | 5.1811 mL | |
| 15 mM | 0.1382 mL | 0.6908 mL | 1.3816 mL | 3.4541 mL | |
| 20 mM | 0.1036 mL | 0.5181 mL | 1.0362 mL | 2.5906 mL | |
| 25 mM | 0.0829 mL | 0.4145 mL | 0.8290 mL | 2.0725 mL | |
| 30 mM | 0.0691 mL | 0.3454 mL | 0.6908 mL | 1.7270 mL | |
| 40 mM | 0.0518 mL | 0.2591 mL | 0.5181 mL | 1.2953 mL | |
| 50 mM | 0.0414 mL | 0.2072 mL | 0.4145 mL | 1.0362 mL | |
| 60 mM | 0.0345 mL | 0.1727 mL | 0.3454 mL | 0.8635 mL | |
| 80 mM | 0.0259 mL | 0.1295 mL | 0.2591 mL | 0.6476 mL | |
| 100 mM | 0.0207 mL | 0.1036 mL | 0.2072 mL | 0.5181 mL |