MMG-11
Based on 5 publication(s) in Google Scholar
MMG-11 is a potent and selective human TLR2 antagonist with low cytotoxicity. MMG-11 inhibits both TLR2/1 and TLR2/6 signaling with IC50s of 1.7 µM for Pam3CSK4-induced hTLR2/1 and 5.7 µM for Pam2CSK4-induced hTLR2/6 responses.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度: 99.24%
- CAS 番号: 313254-94-3
- 分子式: C15H14O7
- 分子量:306.27
-
保管条件:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
-
Flow Cytometry
-
WB
-
Flow Cytometry
-
Cell Proliferation/Viability Assay
-
WB
生物活性
|
TLR2 |
MMG-11 neither shows cellular toxicity nor interference with signaling induced by other TLR agonists, IL-1β or TNF. MMG-11 (0.01-100 μM) shows no cytotoxic effects up to 100 μM in peripheral blood mononuclear cells (PBMCs)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:PBMCs
-
Concentration:0.01, 1, 10, 100 µM
-
Incubation Time:
-
Result:Showed no cytotoxic effects up to 100 µM.
化学情報
-
CAS 番号 313254-94-3
-
性状 Solid
-
分子量 306.27
-
分子式 C15H14O7
-
Color Light yellow to brown
-
SMILES
OC1=C(O)C(O)=C(C(CC2=CC=C(C(OCC)=O)O2)=O)C=C1
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (5)
-
Journal Impact Factor
-
Most Recent
-
Cell Commun Signal
Neutrophil extracellular traps induced by the hypoxic microenvironment in gastric cancer augment tumour growth. [Abstract]2023 May 1;21(1):86. PMID: 37127629
MMG-11 purchased from MedChemExpress. Usage Cited in: Cell Commun Signal. 2023 May 1;21(1):86. [Abstract]
Neutrophils isolated from healthy individuals were pretreated with inhibitors of TLR2 (HY-112146; MMG-11), TLR4 (HY-107575; TLR4-IN-C34 ), TLR9 (HY-131952; TLR7/8/9-IN-1) and RAGE (HY-P2268; RAGE antagonist peptide) for 1 h prior to coculture with hypoxic-CM from GC cells, and the p-p38 level in neutrophils was measured by western blotting.
MMG-11 purchased from MedChemExpress. Usage Cited in: Cell Commun Signal. 2023 May 1;21(1):86. [Abstract]
Neutrophils isolated from healthy individuals were pretreated with inhibitors of TLR2 (HY-112146; MMG-11), TLR4 (HY-107575; TLR4-IN-C34 ), TLR9 (HY-131952; TLR7/8/9-IN-1) and RAGE (HY-P2268; RAGE antagonist peptide) for 1 h prior to coculture with hypoxic-CM from GC cells, and the NET formation was detected with MPO and citH3 staining. Magnification: 20 × . Scale bars: 50 μm. All values are the means ± SDs. ns = not significant, **P < 0.01
-
Mol Immunol
Impact of knockdown LincRNA-Cox2 on apoptosis of macrophage infected with Bacillus Calmette-Guérin. [Abstract]2021 Feb:130:85-95. PMID: 33250268
MMG-11 purchased from MedChemExpress. Usage Cited in: Mol Immunol. 2021 Feb:130:85-95. [Abstract]
RAW264.7 cells were treated with Pam3CSK4 BCG or MMG-11 for 12 h respectively. The expression of LincRNA-Cox2 was detected by qRT-PCR.
-
Adv Biol (Weinh)
HMGB1 Derived from the Pyroptotic Microenvironment Promotes Macrophage Extracellular Traps in Hirschsprung-Associated Enterocolitis. [Abstract]2025 Sep;9(9):e00761. PMID: 40464207
MMG-11 purchased from MedChemExpress. Usage Cited in: Adv Biol (Weinh). 2025 Sep;9(9):e00761. [Abstract]
The MET formation of macrophages pretreated with inhibitors of TLR2 (HY‐112146; MMG-11), TLR4 (HY‐11109; Resatorvid) and RAGE (HY‐P2268; RAGE antagonist peptide) prior to incubation with pyroptotic‐CM was evaluated with SYTOX Green staining and detected by flow cytometry.
MMG-11 purchased from MedChemExpress. Usage Cited in: Adv Biol (Weinh). 2025 Sep;9(9):e00761. [Abstract]
Macrophages were pretreated with inhibitors of TLR2 (MMG-11; HY‐112146), TLR4 (Resatorvid; HY‐11109), TLR9 (TLR7/8/9-IN-1; HY-131952) and RAGE (RAGE antagonist peptide; HY‐P2268) prior to coculture with pyroptotic‐CM, and the p‐p38 and p‐p65 levels in macrophages were measured by western blotting.
MMG-11 purchased from MedChemExpress. Usage Cited in: Adv Biol (Weinh). 2025 Sep;9(9):e00761. [Abstract]
The MET formation of macrophages pretreated with inhibitors of (MMG-11; HY‐112146), TLR4 (Resatorvid; HY‐11109) and RAGE (RAGE antagonist peptide; HY‐P2268) prior to incubation with pyroptotic‐CM was detected by flow cytometry.
-
J Nat Med
Rice-derived glucosylceramides activate innate immune responses in myeloid lineage differentiated dendritic cells via toll-like receptors 2 and 4. [Abstract]2025 Oct 24. PMID: 41136819 -
Biomed Pharmacother
Baicalin attenuates acetaminophen-induced acute liver injury through inhibiting TLR2-dependent neutrophil extracellular trap formation. [Abstract]2025 Sep 17:192:118569. PMID: 40967078
MMG-11 purchased from MedChemExpress. Usage Cited in: Biomed Pharmacother. 2025 Sep 17:192:118569. [Abstract]
APAP-induced NETs formation through TLR2/NLRP3/GSDMD signaling. Sytox green-based NETosis assay and ATP-based cell viability. TLR2i (MMG-11, HY-112146).
溶剤 & 溶解度
DMSO : 100 mg/mL (326.51 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (6.79 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (6.79 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション
-
データシート (274 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
取扱説明書 (2659 KB)
参考文献
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.2651 mL | 16.3255 mL | 32.6509 mL | 81.6273 mL |
| 5 mM | 0.6530 mL | 3.2651 mL | 6.5302 mL | 16.3255 mL | |
| 10 mM | 0.3265 mL | 1.6325 mL | 3.2651 mL | 8.1627 mL | |
| 15 mM | 0.2177 mL | 1.0884 mL | 2.1767 mL | 5.4418 mL | |
| 20 mM | 0.1633 mL | 0.8163 mL | 1.6325 mL | 4.0814 mL | |
| 25 mM | 0.1306 mL | 0.6530 mL | 1.3060 mL | 3.2651 mL | |
| 30 mM | 0.1088 mL | 0.5442 mL | 1.0884 mL | 2.7209 mL | |
| 40 mM | 0.0816 mL | 0.4081 mL | 0.8163 mL | 2.0407 mL | |
| 50 mM | 0.0653 mL | 0.3265 mL | 0.6530 mL | 1.6325 mL | |
| 60 mM | 0.0544 mL | 0.2721 mL | 0.5442 mL | 1.3605 mL | |
| 80 mM | 0.0408 mL | 0.2041 mL | 0.4081 mL | 1.0203 mL | |
| 100 mM | 0.0327 mL | 0.1633 mL | 0.3265 mL | 0.8163 mL |