UBP301
UBP301 is a potent and selective antagonist of kainate receptor with IC50 and KD of 164 μM and 5.94 μM, respectively. UBP301 has ∼30-fold selectivity of kainate receptor over AMPA receptor. UBP301 is the derivative of willardiine.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- CAS 番号: 569371-10-4
- 分子式: C15H14IN3O6
- 分子量:459.19
-
保管条件:
Please store the product under the recommended conditions in the Certificate of Analysis.
iGluR アイソフォーム固有の製品をすべて表示
More
生物活性
164 μM (kainate receptor)[1]
化学情報
-
CAS 番号 569371-10-4
-
分子量 459.19
-
分子式 C15H14IN3O6
-
SMILES
O=C(N(C=C(I)C1=O)C[C@H](N)C(O)=O)N1CC2=CC=C(C(O)=O)C=C2
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
Please store the product under the recommended conditions in the Certificate of Analysis.
溶剤 & 溶解度
DMSO : 100 mg/mL (217.77 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (10.89 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (10.89 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション
参考文献
Complete Stock Solution Preparation Table
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1777 mL | 10.8887 mL | 21.7775 mL | 54.4437 mL |
| 5 mM | 0.4355 mL | 2.1777 mL | 4.3555 mL | 10.8887 mL | |
| 10 mM | 0.2178 mL | 1.0889 mL | 2.1777 mL | 5.4444 mL | |
| 15 mM | 0.1452 mL | 0.7259 mL | 1.4518 mL | 3.6296 mL | |
| 20 mM | 0.1089 mL | 0.5444 mL | 1.0889 mL | 2.7222 mL | |
| 25 mM | 0.0871 mL | 0.4355 mL | 0.8711 mL | 2.1777 mL | |
| 30 mM | 0.0726 mL | 0.3630 mL | 0.7259 mL | 1.8148 mL | |
| 40 mM | 0.0544 mL | 0.2722 mL | 0.5444 mL | 1.3611 mL | |
| 50 mM | 0.0436 mL | 0.2178 mL | 0.4355 mL | 1.0889 mL | |
| 60 mM | 0.0363 mL | 0.1815 mL | 0.3630 mL | 0.9074 mL | |
| 80 mM | 0.0272 mL | 0.1361 mL | 0.2722 mL | 0.6805 mL | |
| 100 mM | 0.0218 mL | 0.1089 mL | 0.2178 mL | 0.5444 mL |