Pz-1
Based on 1 publication(s) in Google Scholar
Pz-1 is a potent RET and VEGFR2 inhibitor with IC50s of less than 1 nM for both wild type kinases.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 99.90%
- CAS No.: 1800505-64-9
- 화학식: C26H26N6O2
- 분자량:454.52
-
보관:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Publications Citing Use of MedChemExpress (MCE) Pz-1
MoreAll VEGFR Isoforms
More
Biological Activity
IC50: < 1 nM (RET and VEGFR2)[1]
Pz-1 is a Type-II tyrosine kinase inhibitor, able to bind the DFG-out conformation of the kinase. In cell-based assays, 1.0 nM of Pz-1 strongly inhibits tyrosine phosphorylation of VEGFR2 and clinically relevant RET mutants, including those refractory to vandetanib and cabozantinib (RETV804M and RETV804L)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1800505-64-9
-
Appearance Solid
-
분자량 454.52
-
화학식 C26H26N6O2
-
Color White to yellow
-
SMILES
O=C(NC1=NOC(C(C)(C)C)=C1)CC2=CC=C(N3C4=CC=C(C5=CN(C)N=C5)C=C4N=C3)C=C2
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
J Pharm Biomed Anal
Analysis of Pz-1, a promising therapeutic for organophosphorus poisoning from rodent plasma by liquid chromatography-tandem mass spectrometry. [Abstract]2024 Dec 26:255:116650. PMID: 39793368
용액&용해도
DMSO : 50 mg/mL (110.01 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.50 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.50 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocol
Mice[1]
In order to address in vivo RET-driven effects, Pz-1 is tested on tumors induced by oncogenic RET compared to a constitutively-active control Ras oncogene. Immunodeficient (nu/nu) mice are then injected with NIH3T3 RETC634Y or NIH3T3 HRasG12V cells and, before tumors have appeared, treated PO with Pz-1 (1.0, 3.0 or 10.0 mg/kg/day) or left untreated. Then the tumor effects are measured[1]
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
순도&문서
-
Data Sheet (276 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2001 mL | 11.0006 mL | 22.0012 mL | 55.0031 mL |
| 5 mM | 0.4400 mL | 2.2001 mL | 4.4002 mL | 11.0006 mL | |
| 10 mM | 0.2200 mL | 1.1001 mL | 2.2001 mL | 5.5003 mL | |
| 15 mM | 0.1467 mL | 0.7334 mL | 1.4667 mL | 3.6669 mL | |
| 20 mM | 0.1100 mL | 0.5500 mL | 1.1001 mL | 2.7502 mL | |
| 25 mM | 0.0880 mL | 0.4400 mL | 0.8800 mL | 2.2001 mL | |
| 30 mM | 0.0733 mL | 0.3667 mL | 0.7334 mL | 1.8334 mL | |
| 40 mM | 0.0550 mL | 0.2750 mL | 0.5500 mL | 1.3751 mL | |
| 50 mM | 0.0440 mL | 0.2200 mL | 0.4400 mL | 1.1001 mL | |
| 60 mM | 0.0367 mL | 0.1833 mL | 0.3667 mL | 0.9167 mL | |
| 80 mM | 0.0275 mL | 0.1375 mL | 0.2750 mL | 0.6875 mL | |
| 100 mM | 0.0220 mL | 0.1100 mL | 0.2200 mL | 0.5500 mL |