AJ2-30
Based on 1 Customer Validation
AJ2-30 is a SLCl5A4 inhibitor. AJ2-30 inhibits endolysosomal TLR7-9-mediated mTOR activation. AJ2-30 blocks endogenous NOD signaling. AJ2-30 can be used in inflammation studies.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 99.72%
- CAS No.: 2700322-79-6
- 화학식: C23H22N4
- 분자량:354.45
-
보관:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Biological Activity
AJ2-30 (5 μM, 24 h) inhibits TLR7/8-induced production of TNFα in human monocytes[2].
AJ2-30 (5 μM, 24 h) inhibits TLR7, TLR7/8, and TLR9-induced IFN-α production in human plasmacytoid dendritic cells (pDCs)[2].
AJ2-30 (5 μM) inhibits bacterial dipeptides MDP and TriDAP-mediated NOD1 and NOD2 signaling in primary human macrophages[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:human B cells
-
Concentration:2, 5, 10 μM
-
Incubation Time:4 h
-
Result:Did not block activation of the mTOR pathway upon stimulation with the TLR2 agonist Pam3CSK4.
Reduced the activation of the mTOR pathway in human B cells stimulated with TLR7/8 or TLR9 agonists.
Reduced the activation of the mTOR pathway in human B cells stimulated with TLR7/8 or TLR9 agonists.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:C57BL/6J mice (8-12-week-old) challenged with TLR9 ligand CpG-A complexed with DOTAP[2]
-
Dosage:50 mg/kg
-
Administration:Intraperitoneal injection, prior to CpG-A
-
Result:Significantly reduced the levels of IFN-α, IFN-β, and IFN-γ in the serum 6 h after CpG-A/DOTAP administration.
Inhibited the phosphorylation of mTOR and 4E-BP1 in splenic pDCs 2 h after CpG-A/DOTAP administration.
Chemical Information
-
CAS No. 2700322-79-6
-
Appearance Solid
-
분자량 354.45
-
화학식 C23H22N4
-
Color White to off-white
-
SMILES
CCN1C2=C(C=CC=C2)C3=CC(CNC4=NC5=C(N4C)C=CC=C5)=CC=C31
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
용액&용해도
DMSO : 50 mg/mL (141.06 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.05 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (277 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.8213 mL | 14.1064 mL | 28.2127 mL | 70.5318 mL |
| 5 mM | 0.5643 mL | 2.8213 mL | 5.6425 mL | 14.1064 mL | |
| 10 mM | 0.2821 mL | 1.4106 mL | 2.8213 mL | 7.0532 mL | |
| 15 mM | 0.1881 mL | 0.9404 mL | 1.8808 mL | 4.7021 mL | |
| 20 mM | 0.1411 mL | 0.7053 mL | 1.4106 mL | 3.5266 mL | |
| 25 mM | 0.1129 mL | 0.5643 mL | 1.1285 mL | 2.8213 mL | |
| 30 mM | 0.0940 mL | 0.4702 mL | 0.9404 mL | 2.3511 mL | |
| 40 mM | 0.0705 mL | 0.3527 mL | 0.7053 mL | 1.7633 mL | |
| 50 mM | 0.0564 mL | 0.2821 mL | 0.5643 mL | 1.4106 mL | |
| 60 mM | 0.0470 mL | 0.2351 mL | 0.4702 mL | 1.1755 mL | |
| 80 mM | 0.0353 mL | 0.1763 mL | 0.3527 mL | 0.8816 mL | |
| 100 mM | 0.0282 mL | 0.1411 mL | 0.2821 mL | 0.7053 mL |