PM-81I
Based on 1 Customer Validation
PM-81I is a potent STAT6 inhibitor (targeting the SH2 structural domain) that effectively reduces STAT6 phosphorylation levels. PM-81I can be used in studies of allergic lung disease, allergic rhinitis, chronic obstructive pulmonary disease or cancer[1].
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 99.91%
- CAS No.: 1637532-83-2
- 화학식: C43H58F2N3O10P
- 분자량:845.91
-
보관:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
Biological Activity
STAT6[1].
PM-81I (0.05, 0.1, 0.5, 1, 2.5, 5 µM; 2 h) inhibits IL-4 stimulated phosphorylation of STAT6 in Bease-2B immortalized human epithelial airway cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Bease-2B immortalized human epithelial airway cells
-
Concentration:0.05, 0.1, 0.5, 1, 2.5, 5 µM
-
Incubation Time:2 h
-
Result:Decreased phosphorylation levels of STAT6 to18%, 13%, 13% when at 1, 2.5 and 5 µM, respectively.
Chemical Information
-
CAS No. 1637532-83-2
-
Appearance Solid
-
분자량 845.91
-
화학식 C43H58F2N3O10P
-
Color White to off-white
-
SMILES
O=C(N1CC2=CC=CC=C2CC1)[C@H]3N(CCC3)C([C@H](C(C)(C)C)NC(/C=C(C4=CC=C(C=C4)C(F)(F)P(OCOC(C(C)(C)C)=O)(OCOC(C(C)(C)C)=O)=O)\C)=O)=O
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
용액&용해도
DMSO : 100 mg/mL (118.22 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (2.96 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (271 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.1822 mL | 5.9108 mL | 11.8216 mL | 29.5540 mL |
| 5 mM | 0.2364 mL | 1.1822 mL | 2.3643 mL | 5.9108 mL | |
| 10 mM | 0.1182 mL | 0.5911 mL | 1.1822 mL | 2.9554 mL | |
| 15 mM | 0.0788 mL | 0.3941 mL | 0.7881 mL | 1.9703 mL | |
| 20 mM | 0.0591 mL | 0.2955 mL | 0.5911 mL | 1.4777 mL | |
| 25 mM | 0.0473 mL | 0.2364 mL | 0.4729 mL | 1.1822 mL | |
| 30 mM | 0.0394 mL | 0.1970 mL | 0.3941 mL | 0.9851 mL | |
| 40 mM | 0.0296 mL | 0.1478 mL | 0.2955 mL | 0.7388 mL | |
| 50 mM | 0.0236 mL | 0.1182 mL | 0.2364 mL | 0.5911 mL | |
| 60 mM | 0.0197 mL | 0.0985 mL | 0.1970 mL | 0.4926 mL | |
| 80 mM | 0.0148 mL | 0.0739 mL | 0.1478 mL | 0.3694 mL | |
| 100 mM | 0.0118 mL | 0.0591 mL | 0.1182 mL | 0.2955 mL |
PM-81I Related Classifications
HY-148093 Related Classifications
Powered by Bioz