TMX-4116
Based on 1 Customer Validation
TMX-4116 is a casein kinase 1α (CK1α) degrader. TMX-4116 shows the degradation preference for CK1α with DC50s less than 200 nM in MOLT4, Jurkat, and MM.1S cells. TMX-4116 can be used for the research of multiple myeloma.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 99.76%
- CAS No.: 2766385-56-0
- 화학식: C17H19N5O4S
- 분자량:389.43
-
보관:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
-
Cell Cycle/DNA Damage Compound Library
HY-L004
-
Kinase Inhibitor Library
HY-L009
-
Stem Cell Signaling Compound Library
HY-L017
-
Wnt/Hedgehog/Notch Compound Library
HY-L020
-
Anti-Cancer Compound Library
HY-L025
-
Anti-Aging Compound Library
HY-L034
-
Anti-Blood Cancer Compound Library
HY-L079
-
Cancer Stem Cells Compound Library
HY-L135
-
Molecular Glue Compound Library
HY-L137
-
Heterocyclic Compound Library
HY-L138
-
Highly Selective Inhibitors Library
HY-L158
-
Serine/Threonine Kinase Inhibitor Library
HY-L164
-
Anti-Hematopathy Compound Library
HY-L171
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Protein Kinase Compound Library
HY-L196
-
High-Throughput Bioactive Compound Library
HY-L205
-
Posttranslational Modification Library
HY-L226
Biological Activity
|
CK1α |
TMX-4116 (compound 16; 1 μM; 4 h) shows a high degradation preference for CK1α in MOLT4 cells[1].
TMX-4116 (250 nM, 4 h) induces primary target degradation of CK1α, while no downregulation of PDE6D, IKZF1, and IKZF3 in MOLT4 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:MOLT4 cells
-
Concentration:1 μM
-
Incubation Time:4 hours
-
Result:Showed a high degradation preference for CK1α.
-
Cell Line:MOLT4, Jurkat, and MM.1S cells
-
Concentration:0 nM, 40 nM, 200 nM, 1 μM
-
Incubation Time:4 hours
-
Result:Showed a high degradation preference for CK1α with the DC50 value less than 200 nM in MOLT4, Jurkat, and MM.1S cells.
Chemical Information
-
CAS No. 2766385-56-0
-
Appearance Solid
-
분자량 389.43
-
화학식 C17H19N5O4S
-
Color Off-white to gray
-
SMILES
O=C(C(N1N=NC(C2=CSC(C(N3CCCC3)=O)=C2OC)=C1)CC4)NC4=O
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
용액&용해도
DMSO : 100 mg/mL (256.79 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.42 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.42 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (274 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.5679 mL | 12.8393 mL | 25.6786 mL | 64.1964 mL |
| 5 mM | 0.5136 mL | 2.5679 mL | 5.1357 mL | 12.8393 mL | |
| 10 mM | 0.2568 mL | 1.2839 mL | 2.5679 mL | 6.4196 mL | |
| 15 mM | 0.1712 mL | 0.8560 mL | 1.7119 mL | 4.2798 mL | |
| 20 mM | 0.1284 mL | 0.6420 mL | 1.2839 mL | 3.2098 mL | |
| 25 mM | 0.1027 mL | 0.5136 mL | 1.0271 mL | 2.5679 mL | |
| 30 mM | 0.0856 mL | 0.4280 mL | 0.8560 mL | 2.1399 mL | |
| 40 mM | 0.0642 mL | 0.3210 mL | 0.6420 mL | 1.6049 mL | |
| 50 mM | 0.0514 mL | 0.2568 mL | 0.5136 mL | 1.2839 mL | |
| 60 mM | 0.0428 mL | 0.2140 mL | 0.4280 mL | 1.0699 mL | |
| 80 mM | 0.0321 mL | 0.1605 mL | 0.3210 mL | 0.8025 mL | |
| 100 mM | 0.0257 mL | 0.1284 mL | 0.2568 mL | 0.6420 mL |
TMX-4116 Related Classifications
HY-145322 Related Classifications
Powered by Bioz