VT-105
Based on 1 Customer Validation
VT-105 is a TEAD inhibitor and VT104 (HY-134956) analog. VT-105 binds to the central hydrophobic pocket of the TEAD3 protein. VT-105 can be used in the research of NF2-deficient malignant mesothelioma.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 99.93%
- CAS No.: 2417718-38-6
- 화학식: C24H18F3N3O
- 분자량:421.41
-
보관:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
All YAP Isoforms
More
Biological Activity
Chemical Information
-
CAS No. 2417718-38-6
-
Appearance Solid
-
분자량 421.41
-
화학식 C24H18F3N3O
-
Color White to off-white
-
SMILES
C[C@@H](C1=CC=CC=N1)NC(C2=CC3=C(N=C2)C(C4=CC=C(C=C4)C(F)(F)F)=CC=C3)=O
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
용액&용해도
DMSO : ≥ 100 mg/mL (237.30 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.93 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (274 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
[1]. Tang TT, et al. Small Molecule Inhibitors of TEAD Auto-palmitoylation Selectively Inhibit Proliferation and Tumor Growth of NF2-deficient Mesothelioma. Mol Cancer Ther. 2021 Jun;20(6):986-998. [Content Brief]
[2]. Hu L, et al. Discovery of a new class of reversible TEA domain transcription factor inhibitors with a novel binding mode. Elife. 2022 Nov 18;11:e80210. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3730 mL | 11.8649 mL | 23.7299 mL | 59.3246 mL |
| 5 mM | 0.4746 mL | 2.3730 mL | 4.7460 mL | 11.8649 mL | |
| 10 mM | 0.2373 mL | 1.1865 mL | 2.3730 mL | 5.9325 mL | |
| 15 mM | 0.1582 mL | 0.7910 mL | 1.5820 mL | 3.9550 mL | |
| 20 mM | 0.1186 mL | 0.5932 mL | 1.1865 mL | 2.9662 mL | |
| 25 mM | 0.0949 mL | 0.4746 mL | 0.9492 mL | 2.3730 mL | |
| 30 mM | 0.0791 mL | 0.3955 mL | 0.7910 mL | 1.9775 mL | |
| 40 mM | 0.0593 mL | 0.2966 mL | 0.5932 mL | 1.4831 mL | |
| 50 mM | 0.0475 mL | 0.2373 mL | 0.4746 mL | 1.1865 mL | |
| 60 mM | 0.0395 mL | 0.1977 mL | 0.3955 mL | 0.9887 mL | |
| 80 mM | 0.0297 mL | 0.1483 mL | 0.2966 mL | 0.7416 mL | |
| 100 mM | 0.0237 mL | 0.1186 mL | 0.2373 mL | 0.5932 mL |
VT-105 Related Classifications
HY-163644 Related Classifications
Powered by Bioz