Yonkenafil
Based on 1 Customer Validation
Yonkenafil (Tunodafil), a novel phosphodiesterase 5 (PDE5) inhibitor, is effective in reducing cerebral infarction, neurological deficits, edema, and neuronal damage in the infarcted area. Yonkenafil may improve cognitive function by modulating neurogenesis and has a potential therapeutic effect on Alzheimer's disease.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 99.52%
- CAS No.: 804518-63-6
- 화학식: C24H33N5O4S
- 분자량:487.61
-
보관:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
Biological Activity
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male Sprague-Dawley (SD) Rat[1]
-
Dosage:4, 8, 16 and 32 mg/kg
-
Administration:i.v. daily for 7 days
-
Result:Induced a dose-dependent decrease in infarct volume, with an ED50 of 12.27 mg/kg.
Increased hsp70 expression, decreased apaf-1 expression, and inhibited caspase-3 and caspase-9 cleavage.
Significantly prevented neuronal damage and increases the number of surviving neurons after stroke.
Prevented decrease in synaptophysin levels and increase in PSD-95 and nNOS levels.
Chemical Information
-
CAS No. 804518-63-6
-
Appearance Solid
-
분자량 487.61
-
화학식 C24H33N5O4S
-
Color Off-white to light yellow
-
SMILES
O=C1C2=C(N(CCC)C=C2C)N=C(C3=CC(S(=O)(N4CCN(CC)CC4)=O)=CC=C3OCC)N1
-
Synonyms
Tunodafil
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
용액&용해도
DMSO : 100 mg/mL (205.08 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.13 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (273 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0508 mL | 10.2541 mL | 20.5082 mL | 51.2705 mL |
| 5 mM | 0.4102 mL | 2.0508 mL | 4.1016 mL | 10.2541 mL | |
| 10 mM | 0.2051 mL | 1.0254 mL | 2.0508 mL | 5.1270 mL | |
| 15 mM | 0.1367 mL | 0.6836 mL | 1.3672 mL | 3.4180 mL | |
| 20 mM | 0.1025 mL | 0.5127 mL | 1.0254 mL | 2.5635 mL | |
| 25 mM | 0.0820 mL | 0.4102 mL | 0.8203 mL | 2.0508 mL | |
| 30 mM | 0.0684 mL | 0.3418 mL | 0.6836 mL | 1.7090 mL | |
| 40 mM | 0.0513 mL | 0.2564 mL | 0.5127 mL | 1.2818 mL | |
| 50 mM | 0.0410 mL | 0.2051 mL | 0.4102 mL | 1.0254 mL | |
| 60 mM | 0.0342 mL | 0.1709 mL | 0.3418 mL | 0.8545 mL | |
| 80 mM | 0.0256 mL | 0.1282 mL | 0.2564 mL | 0.6409 mL | |
| 100 mM | 0.0205 mL | 0.1025 mL | 0.2051 mL | 0.5127 mL |
Yonkenafil Related Classifications
HY-133712 Related Classifications
Powered by Bioz