Sp-cAMPS sodium salt
Based on 1 Customer Validation
Sp-cAMPS sodium salt, a cAMP analog, is potent activator of cAMP-dependent PKA I and PKA II. Sp-cAMPS sodium salt is also a potent, competitive phosphodiesterase (PDE3A) inhibitor with a Ki of 47.6 µM. Sp-cAMPS sodium salt binds the PDE10 GAF domain with an EC50 of 40 μM.
For research use only. We do not sell to patients.
- Purity: 99.45%
- CAS No.: 142439-95-0
- Formula: C10H11N5NaO5PS
- Molecular Weight:367.25
-
Storage:
-20°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Bioactive Compound Library Max
HY-L181
-
Bioactive Compound Library
HY-L001
-
Metabolism/Protease Compound Library
HY-L012
-
Stem Cell Signaling Compound Library
HY-L017
-
TGF-beta/Smad Compound Library
HY-L018
-
Anti-Aging Compound Library
HY-L034
-
Covalent Screening Library
HY-L036
-
Reprogramming Compound Library
HY-L039
-
Anti-Alzheimer's Disease Compound Library
HY-L069
-
Neurodegenerative Disease-related Compound Library
HY-L086
-
Anti-Colorectal Cancer Compound Library
HY-L103
-
Heterocyclic Compound Library
HY-L138
-
Pain-Related Compound Library
HY-L139
-
Metabolic Enzyme Compound Library
HY-L146
-
Multi-Target Compound Library
HY-L176
-
MCE Bioactive Compound Library
HY-L001V
-
Covalent Screening Library Plus
HY-L036P
-
Protein Kinase Compound Library
HY-L196
-
High-Throughput Bioactive Compound Library
HY-L205
Biological Activity
|
PKA I |
PKA II |
PDE3A 47.6 μM (Ki) |
PDE10 GAF domain 50 μM (EC50) |
Treatment of hepatocytes with Sp-cAMPS sodium salt, the stimulatory diastereomer of adenosine cyclic 3',5'-phosphorothioate, mimics the response seen with glucagon. The glucagon-stimulated increases in the level of Ca2+ can be mimicked by Sp-cAMPS sodium salt[4].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 142439-95-0
-
Appearance Solid
-
Molecular Weight 367.25
-
Formula C10H11N5NaO5PS
-
Color White to off-white
-
SMILES
O[C@H]1[C@@H](O[C@@]2([H])[C@@]1([H])O[P@](OC2)([S])=O)N3C4=C(C(N)=NC=N4)N=C3.[Na+].[-]
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
-20°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Solvent & Solubility
DMSO : 100 mg/mL (272.29 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 86.67 mg/mL (236.00 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.81 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.81 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 50 mg/mL (136.15 mM); Clear solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Purity & Documentation
-
Data Sheet (277 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
[1]. Su H Hung, et al. A new nonhydrolyzable reactive cAMP analog, (Sp)-adenosine-3',5'-cyclic-S-(4-bromo-2,3-dioxobutyl)monophosphorothioate irreversibly inactivates human platelet cGMP-inhibited cAMP phosphodiesterase. Bioorg Chem. 2002 Feb;30(1):16-31. [Content Brief]
[2]. L Y Wang, et al. Regulation of kainate receptors by cAMP-dependent protein kinase and phosphatases. Science. 1991 Sep 6;253(5024):1132-5. [Content Brief]
[3]. Ronald Jäger, et al. Activation of PDE10 and PDE11 phosphodiesterases. J Biol Chem. 2012 Jan 6;287(2):1210-9. [Content Brief]
[4]. P A Connelly,et al. A study of the mechanism of glucagon-induced protein phosphorylation in isolated rat hepatocytes using (Sp)-cAMPS and (Rp)-cAMPS, the stimulatory and inhibitory diastereomers of adenosine cyclic 3',5'-phosphorothioate. J Biol Chem. 1987 Mar 25;262(9):4324-32. [Content Brief]
[5]. G Dominguez, et al. Rescuing prefrontal cAMP-CREB pathway reverses working memory deficits during withdrawal from prolonged alcohol exposure. Brain Struct Funct. 2016 Mar;221(2):865-77. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 2.7229 mL | 13.6147 mL | 27.2294 mL | 68.0735 mL |
| 5 mM | 0.5446 mL | 2.7229 mL | 5.4459 mL | 13.6147 mL | |
| 10 mM | 0.2723 mL | 1.3615 mL | 2.7229 mL | 6.8074 mL | |
| 15 mM | 0.1815 mL | 0.9076 mL | 1.8153 mL | 4.5382 mL | |
| 20 mM | 0.1361 mL | 0.6807 mL | 1.3615 mL | 3.4037 mL | |
| 25 mM | 0.1089 mL | 0.5446 mL | 1.0892 mL | 2.7229 mL | |
| 30 mM | 0.0908 mL | 0.4538 mL | 0.9076 mL | 2.2691 mL | |
| 40 mM | 0.0681 mL | 0.3404 mL | 0.6807 mL | 1.7018 mL | |
| 50 mM | 0.0545 mL | 0.2723 mL | 0.5446 mL | 1.3615 mL | |
| 60 mM | 0.0454 mL | 0.2269 mL | 0.4538 mL | 1.1346 mL | |
| 80 mM | 0.0340 mL | 0.1702 mL | 0.3404 mL | 0.8509 mL | |
| 100 mM | 0.0272 mL | 0.1361 mL | 0.2723 mL | 0.6807 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Sp-cAMPS sodium salt Related Classifications
HY-100530C Related Classifications
Powered by Bioz